Mechanical behavior of materials
By S. Pal, Bankim Chandra Ray. 2009
2,347 citations recorded by the source corpus.
In this second edition, every chapter has been revised and updated to incorporate modern materials. This book presents important principles involved in the mechanical behavior of different materials and is the most up-to-date text on this topic with a balanced presentation of theory of mechanical behaviour of metals, polymers, composites and biomaterials, and a theory of mechanics of solids.
Subfields: Biomedical Engineering, General Materials Science, Mechanics of Materials
View Paper: https://www.semanticscholar.org/paper/b3720d6080378f63684165275eafa14921c87e8c
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomedical Engineering
- Dierk Raabe
- M. Meyers
- Kostas Kostarelos
- M. Prato
- Conor James Walsh
- R. Ritchie
- Robert J. Wood
- A. Bianco
In General Materials Science
In Mechanics of Materials
Citations in the corpus
- Fracture mechanics and microstructure in NiTi shape memory alloys (2009, background): “Such specimens yield reasonable fracture mechanics parameters as long as the size of the plastic zone (rp) is significantly smaller than the specimen dimensions (a, B and W), where a, B and W represent crack length, specimen thickness and specimen width, respectively [29,30].”
- Plastic anisotropy and associated deformation mechanisms in nanotwinned metals (2013, neutral): “2): (1) 0 compression, (2) 90 compression and (3) 45 compression.”
- Stimulus-responsive hydrogels: Theory, modern advances, and applications (2015, background): “However, it does not capture creep behavior accurately, as it incorrectly predicts that strain increases with time instead of the observed trend of strain rate decreasing with time [369,372].”
- Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals (2017, positive): “This is known as the Bauschinger effect [44].”
- Sample-size effects in the yield behavior of nanocrystalline nickel (2008, background): “According to conventional solid mechanics, the plastic properties of a metal are independent of size [1].”
- Mechanical Metamaterials and Their Engineering Applications (2019, background): “Therefore, although the theoretical strength of a brittle ceramic or ductile metals has been calculated to be around 1/10 and 1/30 times of its elastic modulus, the typical bulk strength in practice is around 1/300 times the modulus.([95]) Thus, strength is greatly”
- Production and processing of graphene and related materials (2020, background): “Fracture toughness is a property that describes the ability of a material containing a crack or a defect to resist fracture [1454].”
- The elastic properties, elastic models and elastic perspectives of metallic glasses (2012, background): “Actually, in crystals, the compounds that with similar atomic structure and electronic physical properties will share the same form in K X a 0 correlation [32].”
- A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718 (2017, neutral): “(cid:5) (cid:6) TheZener ratio is de fi ned as for both the cubic and tetragonal structures (Meyers and Chawla,1998).”
- Crystallization toughening of a model glass-ceramic (2015, neutral): “[14]:”
- Grain-size dependent mechanical behavior of nanocrystalline metals (2015, background): “For a more detailed analysis, the reader is referred to Meyers and Chawla [69].”
- Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions (2014, methodology): “It is well known [203] that multiple slip is required to permit uniform deformation during plastic working.”
- Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites (2007, background): “This could be explained by brittleness increase of matrix material and local internal deformation in the composite material [23].”
- Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions (2018, background): “However, in the high Al-containing BCC HEAs, the B2 and BCC phases often form a weave-like microstructure, as a result of spinodal decomposition [31e35].”
- Effects of stacking fault energy, strain rate and temperature on microstructure and strength of nanostructured Cu–Al alloys subjected to plastic deformation (2011, methodology): “An empirical relationship between the cell size (dDC) and the applied stress (s) has been found [43]: dDC 1⁄4 KGb s , where K is a constant with a value close to 10, G is the shear modulus, b is the Burgers vector.”