Benjamin W. Schafer

Civil and Structural Engineering · 2002–2021

A researcher in the Science corpus: 24 papers; trusts 11 researchers and is trusted by 14 researchers here, as inferred from the citation graph.

Subfields

• Civil and Structural Engineering — 34 citations into it; #508 of 6,160 by trust here, #1,036 by citations
• Building and Construction — 19 citations into it; #170 of 2,909 by trust here, #706 by citations
• Mechanical Engineering — 18 citations into it; #2,362 of 8,300 by trust here, #5,233 by citations
• Mechanics of Materials — 15 citations into it; #2,730 of 6,291 by trust here, #1,797 by citations

Whom Benjamin W. Schafer trusts overall

Their strongest outbound trust, strongest first, inferred from their citations.

1. S. Ádány
2. C. Moen
3. N. Silvestre
4. Cheng Yu
5. G. Hancock
6. Dinar Camotim
7. Zhanjie Li
8. L. Gardner
9. C. H. Pham
10. Y. Cheung

Who trusts Benjamin W. Schafer overall

1. L. Gardner
2. Cheng Yu
3. S. Afshan
4. Najib Saliba
5. S. Ádány
6. O. Zhao
7. C. Moen
8. Zhanjie Li
9. M. Theofanous
10. C. H. Pham

Papers from Benjamin W. Schafer's perspective

Ordered by how strongly the researchers Benjamin W. Schafer trusts endorse each paper. Same corpus, a different order for every researcher.

1. Buckling Analysis of Cold-formed Steel Members Using CUFSM
2. Numerical Modeling of Stainless Steel Structural Components—A Consistent Approach
3. Finite element modelling of structural stainless steel cross-sections
4. Direct Strength Design of Cold-Formed C-Sections for Shear and Combined Actions
5. Local Buckling Tests on Cold-Formed Steel Beams
6. Local, Distortional, and Euler Buckling of Thin-Walled Columns
7. Distortional Buckling Tests on Cold-Formed Steel Beams
8. Compression Tests of High Strength Steel Channel Columns with Interaction between Local and Distortional Buckling
9. Needle insertion modeling and simulation (IEEE Trans. Robotics Autom.)
10. Nonholonomic Modeling of Needle Steering (Int. J. Robotics Res.)

Their papers

• Steel foam for structures: A review of applications, manufacturing and material properties (2012) — 366 citations
• Tests and design of built-up section columns (2021) — 61 citations
• The mechanics of built-up cold-formed steel members (2020) — 97 citations
• Generalized constrained finite strip method for thin-walled members with arbitrary cross-section: Secondary modes, orthogonality, examples (2014) — 63 citations
• Generalized constrained finite strip method for thin-walled members with arbitrary cross-section: Primary modes (2014) — 79 citations
• Simulation of geometric imperfections in cold-formed steel members using spectral representation approach (2012) — 138 citations
• Impact of basis, orthogonalization, and normalization on the constrained Finite Strip Method for stability solutions of open thin-walled members (2011) — 52 citations
• Cold‐formed steel structures around the world (2011) — 139 citations
• Direct Strength Method for Design of Cold-Formed Steel Columns with Holes (2011) — 141 citations
• Local buckling of structural steel shapes (2010) — 166 citations
• Buckling Analysis of Cold-formed Steel Members with General Boundary Conditions Using CUFSM Conventional and Constrained Finite Strip Methods (2010) — 390 citations
• COMPUTATIONAL MODELING OF COLD-FORMED STEEL (2010) — 322 citations
• Mechanics of Flexible Needles Robotically Steered through Soft Tissue (2010) — 321 citations
• Buckling mode identification of thin-walled members by using cFSM base functions (2010) — 53 citations
• Elastic buckling of cold-formed steel columns and beams with holes (2009) — 175 citations
• Prediction of residual stresses and strains in cold-formed steel members (2008) — 169 citations
• A full modal decomposition of thin-walled, single-branched open cross-section members via the constrained finite strip method (2008) — 173 citations
• Experiments on cold-formed steel columns with holes (2008) — 190 citations
• REVIEW: THE DIRECT STRENGTH METHOD OF COLD-FORMED STEEL MEMBER DESIGN (2008) — 699 citations
• Simulation of cold-formed steel beams in local and distortional buckling with applications to the direct strength method (2007) — 204 citations