Bubble friction drag reduction in a high-Reynolds-number flat-plate turbulent boundary layer

By Wendy Sanders, Eric S. Winkel, D. Dowling, Marcelo Perlin, S. Ceccio. Journal of Fluid Mechanics, 2006

259 citations recorded by the source corpus.

Subfields: Biomedical Engineering, Computational Mechanics, Ocean Engineering

View Paper: https://www.semanticscholar.org/paper/c95a81cc225e4ed15ae9d6633cdfeedae38d41ef

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomedical Engineering

1. S. Ceccio
2. J. Rothstein
3. Simo A. Mäkiharju
4. Marcelo Perlin
5. Varghese Mathai
6. Detlef Lohse

In Computational Mechanics

1. S. Ceccio
2. Marcelo Perlin
3. Simo A. Mäkiharju
4. J. Rothstein
5. Varghese Mathai
6. Detlef Lohse
7. S. Grossmann
8. Chang-Jin Kim

In Ocean Engineering

1. S. Ceccio
2. J. Rothstein
3. Simo A. Mäkiharju
4. Marcelo Perlin
5. Varghese Mathai
6. Detlef Lohse

Citations in the corpus

• On the energy economics of air lubrication drag reduction (2012, methodology): “This technique has been the subject of many studies (Madavan et al., 1985; Kodama et al., 2000; Sanders et al., 2006) on both model and meso-scale, and a recent review is provided by Ceccio (2010).”
• Friction Drag Reduction of External Flows with Bubble and Gas Injection (2010, background): “The level of drag reduction achieved with BDR is strongly related to the near-wall void fraction (Elbing et al. 2008, Guin et al. 1996, Madavan et al. 1985a, Sanders et al. 2006).”
• Bubble-induced skin-friction drag reduction and the abrupt transition to air-layer drag reduction (2008, methodology): “Only in-focus bubbles were tabulated using a method described in Sanders et al. (2006).”
• Slip on Superhydrophobic Surfaces (2010, background): “…in turbulent flows can be achieved through a number of different mechanisms, including the addition of polymers to the fluid (Virk 1975) and the addition of bubbles (Sanders et al. 2006) or air layers (Elbing et al. 2008, Fukuda et al. 2000), compliant walls (Hahn et al. 2002), andriblets(Walsh1990).”
• Frictional drag reduction by bubble injection (2014, unknown): “Elbing et al. (2008) and their group (Sanders et al. 2006; Mäkiharju et al. 2013a, b) investigated the transition among these three types.”
• Bubbly and Buoyant Particle–Laden Turbulent Flows (2020, background): “The injection of bubbles, small or large, in turbulent boundary layers and horizontal channel flows has long been known to modulate the flow, with several experimental explorations in the past few decades (Gutierrez-Torres et al. 2008; Madavan et al. 1984, 1985; Sanders et al. 2006).”