Thermochemical behavior of Norway spruce (Picea abies) at 180–225 °C
By R. Alén, R. Kotilainen, A. Zaman. Wood Science and Technology, 2002
219 citations recorded by the source corpus.
Subfields: Biomedical Engineering, Building and Construction
View Paper: https://www.semanticscholar.org/paper/c2c56ef63154ae1910ca323dd7e0e2f0e8934ca6
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomedical Engineering
In Building and Construction
Citations in the corpus
- Thermal Modifications in Softwood Studied by FT‐IR and UV Resonance Raman Spectroscopies (2005, background): “13 14 15 Acetyl groups of hemicelluloses are cleaved at relatively low temperatures, liberating acetic acid, which catalyses depolymerization of polysaccharides.”
- PINE WOOD MODIFICATION BY HEAT TREATMENT IN AIR (2008, background): “Alén et al. (2002) studied the mass loss of heat treated spruce at temperatures between 180ºC and 225ºC during 4 to 8 hours and concluded that they were between 1.5% at 180 ºC (4 h) and 12.5% at 225ºC (6h).”
- Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen (2008, background): “The possibility of the re-absorption of the water decreases, and the dimensional stability increases (Dirol and Guyonnet 1993; Alén et al. 2002; Pavlo and Niemz 2003).”
- Wood modification by heat treatment: a review. (2009, background): “Alén et al. (2002) studied the mass loss of spruce wood at 180ºC and 225ºC during 4 - 8 h and obtained 1.5% at 180ºC (4 h) and 12.5% at 225ºC (6h).”
- Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood (2007, result): “In general, mass loss increased with time and temperature of treatment, which is in agreement with earlier reported data for Scots pine and silver birch (Zaman et al. 2000) and spruce (Alén et al. 2002).”
- Extractive composition and summative chemical analysis of thermally treated eucalypt wood (2008, background): “The hydrogen and oxygen content of the heat-treated biomass is decreased (Alén et al. 2002; Boonstra and Tjeerdsma 2006).”