Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension

By Mauro Dolce, Donatello Cardone. 2001

459 citations recorded by the source corpus.

Subfields: Materials Chemistry

View Paper: https://www.semanticscholar.org/paper/a058336b01d54ee5d98995bb54bdc0c01d9622c0

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Materials Chemistry

1. Yongjun He
2. Qingping Sun
3. Gangbing Song
4. Hao Yin
5. Hongnan Li
6. Songye Zhu
7. B. Smith
8. C. Qiu

Citations in the corpus

• Performance-based seismic design of self-centering steel frames with SMA-based braces (2017, background): “For example, the superelastic strain reaches up to 8% for Nitinol cables [14], 12% for Cu-Al-Mn SMA [20], 13.”
• SHAPE MEMORY ALLOYS IN SEISMIC RESISTANT DESIGN AND RETROFIT: A CRITICAL REVIEW OF THEIR POTENTIAL AND LIMITATIONS (2004, background): “The material does not have nearly as high damping capacity in the austenitic form, which has typical equivalent viscous damping ratios of approximately 4–8% [Dolce and Cardone, 2001; DesRoches et al., 2002].”
• Shape Memory Alloys for Seismic Response Modification: A State-of-the-Art Review (2005, methodology): “It is noted here that some authors (e.g., Dolce and Cardone 2001a) have reported some difficulty in obtaining detailed mechanical specifications from SMA manufacturers.”
• Seismic Response Control Using Shape Memory Alloys: A Review (2011, background): “A number of experimental studies have been conducted to investigate the effects of temperature on superelastic SMAs (Piedboeuf et al., 1998; Dolce and Cardone, 2001; Chang et al., 2006; Chen and Song, 2006; Churchill et al., 2009; Ozbulut and Hurlebaus, 2010c).”
• Applications of shape memory alloys in civil structures (2006, background): “Dolce and Cardone [ 10 ]i nvestigated the superelastic Nitinol wires subjected to tension loading.”
• Behavior and modeling of superelastic shape memory alloy reinforced concrete beams (2013, background): “Dolce and Cardone [4] were able to show that NiTi shape memory alloy wires are suitable as kernel components for seismic protection devices, specifically owing to the re-centering and energy dissipation characteristics.”
• Fatigue properties of a pseudoelastic NiTi alloy: Strain ratcheting and hysteresis under cyclic tensile loading (2014, background): “In addition, the evolution of damping properties and the seismic damping capabilities of pseudoelastic SMAs was analyzed in [33,34], while the modification of the shape memory properties of thin wire for actuators was analyzed in [35,36].”
• Effect of deformation frequency on temperature and stress oscillations in cyclic phase transition of NiTi shape memory alloy (2014, background): “…et al., 2011a, 2011b), performances of the material under cyclic loading are always of key concern in the applications (Piedboeuf et al., 1998; Dolce and Cardone, 2001; Lim and McDowell, 2002; Saadat et al., 2002; Puglisi and Truskinovsky 2005; Dolce and Cardone, 2005; Predki et al., 2006;…”