Tribological properties of diamond and SiO2 nanoparticles added in paraffin

By D. Peng, Yuan Kang, R. Hwang, S. Shyr, Yeon-Pun Chang. 2009

305 citations recorded by the source corpus.

Subfields: Mechanical Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/8a47d5c23e0e78e58b77009f68538049b3c5005f

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Mechanical Engineering

1. M. Sayuti
2. Ahmed A. D. Sarhan
3. Han Huang
4. Ooi Ming Erh
5. F. Salem
6. Zhengyi Jiang
7. B. Rahmati
8. Jingwei Zhao

In Mechanics of Materials

1. Ahmed A. D. Sarhan
2. Zhengyi Jiang
3. A. Tiwari
4. Anuj Kumar Sharma
5. Amit Rai Dixit

Citations in the corpus

• Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system (2014, background): “In recent practice, several types of nanoparticles were utilized to investigate the machining performance, particularly on surface quality, of materials such as diamond and SiO2 nanoparticles (Peng et al., 2009).”
• Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions (2013, background): “The tribological properties of ZnO [12–14], ZrO2 [13–15], TiO2 [16,17], SiO2 [7] and CuO [13,14,17] were investigated.”
• Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption (2014, background): “Physical analysis of nano-lubricants (Peng et al., 2009) shows that dispersed nanoparticles can easily penetrate into the rubbing surfaces and have a great elasto-hydrodynamic lubrication effect.”
• Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel (2018, background): “The effective NPs behaving in the rubbing zone originate from two sources, including the ones deposited in the surface valleys [26, 28] and the others outside the contact zone [21, 46].”
• Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining (2014, background): “A physical analysis of nanolubricant showed that nanoparticles can easily penetrate into the rubbing surfaces and have considerable elastohydrodynamic lubrication effect (Peng et al., 2009).”