Ahmed A. D. Sarhan

Mechanical Engineering · 2012–2021

A researcher in the Science corpus: 7 papers; trusts 8 researchers and is trusted by 6 researchers here, as inferred from the citation graph.

Subfields

• Mechanical Engineering — 123 citations into it; #1,976 of 8,300 by trust here, #2,601 by citations
• Electrical and Electronic Engineering — 87 citations into it; #7,735 of 16,539 by trust here, #10,154 by citations
• Biomedical Engineering — 64 citations into it; #4,593 of 10,734 by trust here, #5,494 by citations
• Mechanics of Materials — 18 citations into it; #3,319 of 6,291 by trust here, #2,341 by citations
• Civil and Structural Engineering — 12 citations into it

Whom Ahmed A. D. Sarhan trusts overall

Their strongest outbound trust, strongest first, inferred from their citations.

1. B. Ozcelik
2. B. Shen
3. S. A. Lawal
4. A. Adhvaryu
5. M. Hadad
6. Mustafizur Rahman

Who trusts Ahmed A. D. Sarhan overall

1. Anuj Kumar Sharma
2. A. Tiwari
3. Mozammel Mia
4. Amit Rai Dixit
5. M. Sayuti
6. M. Sarıkaya

Papers from Ahmed A. D. Sarhan's perspective

Ordered by how strongly the researchers Ahmed A. D. Sarhan trusts endorse each paper. Same corpus, a different order for every researcher.

1. Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method
2. Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel
3. Minimal quantity lubrication in turning: Effect on tool wear
4. A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys
5. Analysis of process parameters in surface grinding with graphite as lubricant based on the Taguchi method
6. Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling
7. Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in Milling
8. Vegetable oils as a potential cutting fluid—An evolution
9. Machining of nickel-base, Inconel 718, alloy with ceramic tools under finishing conditions with various coolant supply pressures
10. Turning of Brasses Using Minimum Quantity of Lubricant (MQL) and Flooded Lubricant Conditions

Their papers

• An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish (2012) — 176 citations
• Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system (2014) — 139 citations
• A Comprehensive Review on Machining of Titanium Alloys (2021) — 142 citations
• State of the art in powder mixed dielectric for EDM applications (2016) — 138 citations
• Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption (2014) — 248 citations
• Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining (2014) — 225 citations
• Investigating the Minimum Quantity Lubrication in grinding of Al2O3 engineering ceramic (2014) — 151 citations