Bending strength and toughness of heat-treated wood

By Y. Kubojima, T. Okano, M. Ohta. Journal of Wood Science, 2000

232 citations recorded by the source corpus.

Subfields: Building and Construction, Mechanical Engineering, Plant Science

View Paper: https://www.semanticscholar.org/paper/5999e3ea3cd27885068ac755973a83f236416096

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Building and Construction

1. B. Esteves
2. Helena Pereira
3. Idalina Domingos
4. Yanglun Yu
5. Wenji Yu
6. Bror Sundqvist
7. A. Marques
8. Y. Boluk

In Mechanical Engineering

1. Helena Pereira
2. B. Esteves
3. Bror Sundqvist
4. A. Marques
5. Idalina Domingos

In Plant Science

1. Yanglun Yu
2. Wenji Yu
3. Helena Pereira
4. Bror Sundqvist
5. B. Esteves

Citations in the corpus

• Wood modification by heat treatment: a review. (2009, background): “Kubojima et al. (2000a) reported that the effects of heat treatment were similar in green and dry wood.”
• Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood (2007, background): “The major disadvantage is the reduction of mechanical resistance (Kim et al. 1998; Kubojima et al. 2000; Bengtsson et al. 2002; Reiterer and Sinn 2002; Epmeier et al. 2004; Unsal and Ayrilmis 2005; Johansson and Morén 2006) that can be an impediment for some uses.”
• Heat-induced colour changes of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood (2008, background): “…may reduce the mechanical resistance, mainly of bending (Kollmann and Schneider 1963; Viitanen et al. 1994; Viitaniemi et al. 1997; Kim et al. 1998; Kubojima et al. 2000; Epmeier et al. 2001; Jämsä and Viitaniemi 2001; Rapp and Sailer 2001; Kamdem et al. 2002; Yildiz 2002; Bengtsson et al. 2002;…”
• Effect of processing methods on the mechanical properties of engineered bamboo (2015, unknown): “properties [12–19].”
• Determination of formic-acid and acetic acid concentrations formed during hydrothermal treatment of birch wood and its relation to colour, strength and hardness (2006, background): “Along with the improvement in durability, some unwanted effects arise, such as reduction of wood strength (Noack 1969; Rusche 1973; Kubojima et al. 2000) and reduction of hardness (Sandermann and Augustin 1963).”
• Colour changes and acid formation in wood during heating (2004, background): “Moreover, it also seems possible to enhance strength and hardness slightly in comparison to natural wood within a certain domain of time/temperature of treatment (Kubojima et al. 2000).”
• Effect of thermal treatment on the physical and mechanical properties of phyllostachys pubescen bamboo (2012, background): “As reported by Windeisen et al. (2007) and Kubojima et al. (2000), part of amorphous cellulose in wood partially crystallized, which increased the wood stiffness.”
• Strength properties of thermally modified softwoods and its relation to polymeric structural wood constituents (2007, unknown): “[2, 14, 17, 28, 38, 41, 44, 47].”
• Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen (2008, background): “Kubojima et al. (2000) observed a very significant deterioration in air compared to nitrogen gas.”