Anthony M. Waas

Mechanics of Materials · 2000–2016

A researcher in the Science corpus: 15 papers; trusts 19 researchers and is trusted by 12 researchers here, as inferred from the citation graph.

Subfields

• Mechanics of Materials — 68 citations into it; #1,441 of 6,291 by trust here, #860 by citations
• Materials Chemistry — 37 citations into it
• Polymers and Plastics — 19 citations into it; #1,554 of 2,623 by trust here, #1,244 by citations
• Civil and Structural Engineering — 13 citations into it
• Building and Construction — 7 citations into it; #1,300 of 2,909 by trust here, #907 by citations

Whom Anthony M. Waas trusts overall

Their strongest outbound trust, strongest first, inferred from their citations.

1. B. F. Sørensen
2. Michael D. Thouless
3. Qingda Yang
4. De Xie
5. G. Alfano
6. Suyi Li
7. M. S. Kafkalidis
8. Pedro P. Camanho
9. C. Dávila
10. Pablo D. Zavattieri

Who trusts Anthony M. Waas overall

1. van den Mj Marco Bosch
2. P. Gustafson
3. Jörn Mosler
4. Suyi Li
5. V. Cunha
6. De Xie
7. R. Campilho
8. P. Schreurs
9. Michael D. Thouless
10. B. F. Sørensen

Papers from Anthony M. Waas's perspective

Ordered by how strongly the researchers Anthony M. Waas trusts endorse each paper. Same corpus, a different order for every researcher.

1. Mixed-mode fracture analyses of plastically-deforming adhesive joints
2. Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues
3. Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite
4. COHESIVE ZONE MODELING OF CRACK NUCLEATION AT BIMATERIAL CORNERS
5. Elastic–plastic mode-II fracture of adhesive joints
6. A COMPARISON OF THE PREDICTIVE CAPABILITIES OF CURRENT FAILURE THEORIES FOR COMPOSITE LAMINATES, JUDGED AGAINST EXPERIMENTAL EVIDENCE
7. Cohesive law and notch sensitivity of adhesive joints
8. The effects of geometry and material properties on the fracture of single lap-shear joints
9. The effects of shear on delamination in layered materials
10. Mixed-Mode Decohesion Elements for Analyses of Progressive Delamination

Their papers

• Ultrastrong and Stiff Layered Polymer Nanocomposites (2007) — 1,521 citations
• Nonlinear, finite deformation, finite element analysis (2016) — 67 citations
• Experimental and numerical study on the low-velocity impact behavior of foam-core sandwich panels (2013) — 236 citations
• Interaction between kinking and splitting in the compressive failure of unidirectional fiber reinforced laminated composites (2013) — 141 citations
• Reactive Aramid Nanostructures as High‐Performance Polymeric Building Blocks for Advanced Composites (2013) — 186 citations
• On the Importance of Work-Conjugacy and Objective Stress Rates in Finite Deformation Incremental Finite Element Analysis (2013) — 48 citations
• Dispersions of Aramid Nanofibers: A New Nanoscale Building Block (2011) — 751 citations
• The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints (2009) — 209 citations
• Increasing the length of single-wall carbon nanotubes in a magnetically enhanced arc discharge (2008) — 136 citations
• Discrete cohesive zone model for mixed-mode fracture using finite element analysis (2006) — 428 citations
• Mixed-mode cohesive-zone models for fracture of an adhesively bonded polymer–matrix composite (2006) — 273 citations
• Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite (2005) — 241 citations
• Use of mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite (2005) — 234 citations
• Analysis of 2D triaxial flat braided textile composites (2003) — 155 citations
• Pullout Response of a Smooth Fiber with an End Anchorage (2000) — 77 citations