COHESIVE ZONE MODELING OF CRACK NUCLEATION AT BIMATERIAL CORNERS
By I. Mohammed, K. Liechti. 2000
203 citations recorded by the source corpus.
Subfields: Mechanics of Materials
View Paper: https://www.semanticscholar.org/paper/f6f38e46074b7a691bc5f198c03075131114d8cb
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Mechanics of Materials
- Anthony M. Waas
- Michael D. Thouless
- Zohar Yosibash
- Suyi Li
- J. Schroeder
- Pablo D. Zavattieri
- K. Volokh
- Qingda Yang
Citations in the corpus
- Cohesive models for damage evolution in laminated composites (2005, background): “Moreover, fracture studies using cohesive zones to model bimaterial interfaces (Mohammed and Lechti, 2000), adhesive joints (Thouless and Yang, 2001; Yang and Thouless, 2001), or laminates (Massabò et al.”
- Use of mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite (2005, background): “Under these conditions, one strength parameter would be expected to suffice to predict the behavior of different geometries, as illustrated by [20].”
- Direct extraction of rate-dependent traction–separation laws for polyurea/steel interfaces (2009, background): “The cohesive law at each loading rate can be expressed by a quadratic polynomial, similar to the polynomial cohesive law proposed by Needleman (1987).”
- A failure criterion for brittle elastic materials under mixed-mode loading (2006, methodology): “Two sources of experimental results were considered for validating the failure criterion: (a) Experiments performed on PMMA specimens with different V-notch opening angles and mode mixity ratios reported in Seweryn and Lukaszewicz (2002), and (b) Experiments performed by the authors on 3PB V-notched”
- Comparison between cohesive zone models (2004, background): “[11]; Hutchinson and Evans [12]; Mohammed and Liechti [13]; Needleman [14]; Rahulkumar et al.”
- Analysis of crack growth and crack-tip plasticity in ductile materials using cohesive zone models (2003, background): “The actual shape (form) of the separation law is assumed to be relatively unimportant to the material separation behavior (Tvergaard and Hutchinson, 1992; Wei and Hutchinson, 1999; Hutchinson and Evans, 2000; Rahulkumar et al., 2000; Mohammed and Liechti, 2000 ).”