Per-Simon Kildal
Aerospace Engineering · 2001–2016
A researcher in the Science corpus: 22 papers; trusts 11 researchers and is trusted by 30 researchers here, as inferred from the citation graph.
Subfields
- Aerospace Engineering — 30 citations into it; #603 of 6,421 by trust here, #900 by citations
- Electrical and Electronic Engineering — 29 citations into it; #789 of 16,539 by trust here, #4,044 by citations
- Electronic, Optical and Magnetic Materials — 7 citations into it; #1,211 of 2,886 by trust here, #2,494 by citations
Whom Per-Simon Kildal trusts overall
Their strongest outbound trust, strongest first, inferred from their citations.
- Kent Rosengren
- Eva Rajo-Iglesias
- E. Alfonso
- Mario G. Silveirinha
- Alejandro Valero-Nogueira
- Ashraf Uz Zaman
- Ahmed A. Kishk
- Carlos A. Fernandes
- Anthony Grbic
- Jorge R. Costa
Who trusts Per-Simon Kildal overall
- Ashraf Uz Zaman
- Eva Rajo-Iglesias
- Mahsa Ebrahimpouri
- Davoud Zarifi
- Kent Rosengren
- S. A. Razavi
- Ahmed A. Kishk
- Xiaoming Chen
- Ali Farahbakhsh
- O. Quevedo–Teruel
Papers from Per-Simon Kildal's perspective
Ordered by how strongly the researchers Per-Simon Kildal trusts endorse each paper. Same corpus, a different order for every researcher.
- Periodic analysis of a 2-D negative refractive index transmission line structure
- Parallel Plate Cavity Mode Suppression in Microstrip Circuit Packages Using a Lid of Nails (IEEE Microwave and Wireless Components Letters)
- Local Metamaterial-Based Waveguides in Gaps Between Parallel Metal Plates (IEEE Antennas and Wireless Propagation Letters)
- Electromagnetic Characterization of Textured Surfaces Formed by Metallic Pins (IEEE Transactions on Antennas and Propagation)
- EM Modeling of surfaces with STOP or GO characteristics-artificial magnetic conductors and soft and
- Design and experimental verification of ridge gap waveguide in bed of nails for parallel-plate mode suppression
- Definition of effective diversity gain and how to measure it in a reverberation chamber
- Electromagnetic analysis of effective and apparent diversity gain of two parallel dipoles (IEEE Antennas and Wireless Propagation Letters)
- A Low Profile and Low Sidelobe Wideband Slot Antenna Array Feb by an Amplitude-Tapering Waveguide Feed-Network (IEEE Transactions on Antennas and Propagation)
- Spatial, polarization, and pattern diversity for wireless handheld terminals
Their papers
- Correlation and capacity of MIMO systems and mutual coupling, radiation efficiency, and diversity gain of their antennas: simulations and measurements in a reverberation chamber (2004) — 609 citations
- Local Metamaterial-Based Waveguides in Gaps Between Parallel Metal Plates (2009) — 887 citations
- Parallel Plate Cavity Mode Suppression in Microstrip Circuit Packages Using a Lid of Nails (2010) — 198 citations
- Design and experimental verification of ridge gap waveguide in bed of nails for parallel-plate mode suppression (2011) — 426 citations
- Numerical studies of bandwidth of parallel-plate cut-off realised by a bed of nails, corrugations and mushroom-type electromagnetic bandgap for use in gap waveguides (2011) — 277 citations
- Study of distributions of modes and plane waves in reverberation chambers for the characterization of antennas in a multipath environment (2001) — 138 citations
- Electromagnetic analysis of effective and apparent diversity gain of two parallel dipoles (2003) — 148 citations
- Characterization of antennas for mobile and wireless terminals by using reverberation chambers: improved accuracy by platform stirring (2001) — 196 citations
- Definition of effective diversity gain and how to measure it in a reverberation chamber (2002) — 171 citations
- Radiation efficiency, correlation, diversity gain and capacity of a six-monopole antenna array for a MIMO system: theory, simulation and measurement in reverberation chamber (2005) — 381 citations
- Wide-Band Slot Antenna Arrays With Single-Layer Corporate-Feed Network in Ridge Gap Waveguide Technology (2014) — 228 citations
- 2$\times$ 2-Slot Element for 60-GHz Planar Array Antenna Realized on Two Doubled-Sided PCBs Using SIW Cavity and EBG-Type Soft Surface fed by Microstrip-Ridge Gap Waveguide (2014) — 150 citations
- Corrections to “Channel Sounding of Loaded Reverberation Chamber for Over-the-Air Testing of Wireless Devices—Coherence Bandwidth Versus Average Mode Bandwidth and Delay Spread” (2009) — 154 citations
- Microstrip-Ridge Gap Waveguide–Study of Losses, Bends, and Transition to WR-15 (2014) — 136 citations
- Design and Fabrication of a High-Gain 60-GHz Corrugated Slot Antenna Array With Ridge Gap Waveguide Distribution Layer (2016) — 181 citations
- Characterization of Reverberation Chambers for OTA Measurements of Wireless Devices: Physical Formulations of Channel Matrix and New Uncertainty Formula (2012) — 232 citations
- Narrow-Band Microwave Filter Using High-Q Groove Gap Waveguide Resonators With Manufacturing Flexibility and No Sidewalls (2012) — 159 citations
- Three metamaterial-based gap waveguides between parallel metal plates for mm/submm waves (2009) — 310 citations
- The eleven antenna: a compact low-profile decade bandwidth dual polarized feed for reflector antennas (2006) — 180 citations
- Special Issue on Artificial Magnetic Conductors, Soft/Hard Surfaces, and Other Complex Surfaces (2005) — 142 citations