Jean François Rigal

Mechanical Engineering · 2006–2013

A researcher in the Science corpus: 7 papers; trusts 4 researchers and is trusted by 9 researchers here, as inferred from the citation graph.

Subfields

• Mechanical Engineering — 66 citations into it; #1,766 of 8,300 by trust here, #3,227 by citations
• Biomedical Engineering — 44 citations into it; #3,106 of 10,734 by trust here, #5,297 by citations
• Electrical and Electronic Engineering — 33 citations into it; #9,967 of 16,539 by trust here, #9,402 by citations

Whom Jean François Rigal trusts overall

Their strongest outbound trust, strongest first, inferred from their citations.

1. J. Paulo Davim
2. Dilbag Singh
3. P. Venkateswara Rao
4. Alexandre M. Abrão

Who trusts Jean François Rigal overall

1. Y. Ayed
2. Guénaël Germain

Papers from Jean François Rigal's perspective

Ordered by how strongly the researchers Jean François Rigal trusts endorse each paper. Same corpus, a different order for every researcher.

1. Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools
2. Development of Empirical Models for Surface Roughness Prediction in Finish Turning
3. Modeling of Cutting Forces Under Hard Turning Conditions Considering Tool Wear Effect
4. Mechanical Properties of Hardened AISI 52100 Steel in Hard Machining Processes
5. Hard machining of hardened bearing steel using cubic boron nitride tool
6. On machining of hardened AISI D2 steel with PCBN tools
7. Cutting forces and surface finish when machining medium hardness steel using CBN tools
8. A surface roughness prediction model for hard turning process
9. CBN tool wear in hard turning: a survey on research progresses
10. Tool nose radius effects on finish hard turning

Their papers

• Hard machining of hardened bearing steel using cubic boron nitride tool (2009) — 244 citations
• Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool (2010) — 439 citations
• Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351) (2008) — 373 citations
• Analysis of surface roughness and cutting force components in hard turning with CBN tool: Prediction model and cutting conditions optimization (2012) — 367 citations
• A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning (2006) — 199 citations
• On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations (2013) — 237 citations
• Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steel (2013) — 155 citations