Hydration of alkali-activated slag: thermodynamic modelling
By B. Lothenbach, A. Gruskovnjak. 2007
168 citations recorded by the source corpus.
Subfields: Building and Construction, Civil and Structural Engineering, Environmental Chemistry
View Paper: https://www.semanticscholar.org/paper/f9e46d771feb8b5bfd73a914d3c7b39e14bab85a
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Building and Construction
In Civil and Structural Engineering
In Environmental Chemistry
Citations in the corpus
- Strength and drying shrinkage of reactive MgO modified alkali-activated slag paste (2014, unknown): “hydrogarnet proceeds very slowly at room temperature and is not expected to be present in significant quantities at early age [66].”
- Thermodynamic equilibrium calculations in cementitious systems (2010, background): “An increase of the amount of alkaline activator increases not only the alkali concentrations and pH values but also Al and Si concentrations and decreases the Ca concentrations [141, 142, 144].”
- Effects of slag substitution on physical and mechanical properties of fly ash-based alkali activated binders (AABs) (2019, background): “Hydrotalcite has been identified in slag systems activated with different activators [37, 39, 40].”
- A thermodynamic model for C-(N-)A-S-H gel: CNASH_ss. Derivation and validation (2014, background): “627 However, the uncertainty associated with each experimental data point is expected to be large, 628 possibly also up to one order of magnitude, because slag reaction extents are not quantified in the 629 experimental studies referenced here (with the exception of the estimations in [87] for the d”
- Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag — Part I: Effect of MgO (2011, methodology): “Solid phases XRD shows the presence of C–S–H and a hydrotalcite like phase as already observed in other studies on hydrated alkali activated slags [3,4,6,9,10,17,28].”
- Pore solution composition of alkali-activated slag/fly ash pastes (2019, background): “296 This was because K was sourced from slag and increased with the dissolution of slag, while Na 297 was mainly sourced from the alkaline activator and decreased as it was taken up into the calcium 298 aluminosilicate hydrates [33, 40, 41].”
- Thermodynamic modelling of alkali-activated slag cements (2015, methodology): “4 has been applied to AAS cements in the past (Lothenbach and Gruskovnjak, 2007), however the 78”
- Advances in alternative cementitious binders (2011, background): “In higher calcium alkali-activated slag systems, the most detailed models available have been developed from a thermodynamic basis, then linked to reaction kinetics via parameters describing the extent of reaction and by pore solution chemistry [109,110].”