Broadband Millimeter-Wave Propagation Measurements and Models Using Adaptive-Beam Antennas for Outdoor Urban Cellular Communications

By Theodore Ted S. Rappaport, Felix Gutierrez, Eshar Ben-Dor, James Murdock, Yijun Qiao, Jonathan I. Tamir. IEEE Transactions on Antennas and Propagation, 2013

839 citations recorded by the source corpus.

Subfields: Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/f87aa8b1087f11606cff27da4d60852d6671993a

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Electrical and Electronic Engineering

Citations in the corpus

Millimeter Wave Communications for Future Mobile Networks (2017, background): “74 [77] 38 Outdoor Cellular LoS/NLoS Austin (D), 25-dBi TX and 13.”
Modulation Formats and Waveforms for 5G Networks: Who Will Be the Heir of OFDM?: An overview of alternative modulation schemes for improved spectral efficiency (2014, background): “Although there is still little knowledge about mm-wave propagation in urban areas, studies are ongoing [62].”
Wideband Millimeter-Wave Propagation Measurements and Channel Models for Future Wireless Communication System Design (2015, background): “The study revealed that all locations within 200 m of the base station (LOS and NLOS) had detectable signal for a system with 160 dB maximum measurable path loss [35].”
5G Millimeter-Wave Antenna Array: Design and Challenges (2017, background): “First, in both backhaul and access links, mmw communications may be frequently blocked by various obstacles [10].”
Millimeter-Wave Enhanced Local Area Systems: A High-Data-Rate Approach for Future Wireless Networks (2014, background): “Early path loss, multipath, and RMS delay spread models have appeared in the literature for mmWave channels, and more measurements and data processing will be required by the academic community to better understand the new opportunities provided by mmWave spectrum [4], [5], [7], [10]–[13], [17].”
Joint Spatial Division and Multiplexing: Opportunistic Beamforming, User Grouping and Simplified Downlink Scheduling (2014, methodology): “Joint Spatial Division and Multiplexing (JSDM) was proposed by the authors [11] to enable massive MIMO gains also for FDD systems.”
Beamforming for Millimeter Wave Communications: An Inclusive Survey (2016, neutral): “from recently conducted experiments [73]–[75].”
60-GHz Millimeter-Wave Channel Measurements and Modeling for Indoor Office Environments (2017, methodology): “This method has been used in [9], [10], and [21] for outdoor urban measurements, but the elevation pointing angles were very limited, for example, just pointed to 0° and ±10°.”
Next Generation 5G Wireless Networks: A Comprehensive Survey (2016, methodology): “Alternately, reflected, scattered and diffracted signals still might have sufficient energy, which needs to be explored when LOS is completely blocked [30].”
A Survey on Low Latency Towards 5G: RAN, Core Network and Caching Solutions (2017, background): “ology which brings massive new spectrum for communications in the 3-300 GHz band. However, mmWave is dependent on diverse aspects such as transmitter/receiver location and environmental topology [3], [246]. Moreover, channel modeling with delay spread, path loss, NLOS beam forming,andangular spread ”
A Comprehensive Survey on Millimeter Wave Communications for Fifth-Generation Wireless Networks: Feasibility and Challenges (2020, background): “In the physical layer, there have been considerable mmWave propagation campaigns on the 28GHz, 38GHz, 60GHz, and 73GHz bands for indoor and outdoor environments covering both line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios [48]–[55].”
Fundamental Limits of Caching in Wireless D2D Networks (2014, methodology): “An example of such analysis is provided in [7] for a D2D network with realistic propagation channel modeling operating at various frequency bands, from cellular microwave to mm-wave bands, as envisaged in the forthcoming 5G standardization [63]–[65].”
Modeling and Analyzing Millimeter Wave Cellular Systems (2016, methodology): “in [3], [39], and [138], and for simplicity we use αL = 2 and αN = 4 as default values.”
A survey of millimeter wave communications (mmWave) for 5G: opportunities and challenges (2015, background): “The large bandwidth in the mmWave bands promotes the usage of mmWave communications in the 5G cellular access [13, 19, 106].”
Path loss models for 5G millimeter wave propagation channels in urban microcells (2013, methodology): “Similarly in Austin, Texas, it can be seen that for the work in [7][8], the path loss exponent ranges from 3.”
3-D Millimeter-Wave Statistical Channel Model for 5G Wireless System Design (2016, background): “The 38-and 60-GHz outdoor ultrawideband channels have been extensively studied at the UT Austin campus [13], and more recently at 28 and 73 GHz at New York University using directional antennas for outdoor mobile communications [14].”
Indoor Office Wideband Millimeter-Wave Propagation Measurements and Channel Models at 28 and 73 GHz for Ultra-Dense 5G Wireless Networks (2015, background): “Previous work at 28, 38, 60, and 73 GHz in outdoor environments provided insights into directional path loss models [6], [106], [112], [125]–[127].”
Enabling Large Intelligent Surfaces With Compressive Sensing and Deep Learning (2019, background): “For example, mmWave channels normally consist of a few channel paths, ∼3-5 paths, [28]–[30], while sub-6 GHz signal propagation generally experiences rich scattering resulting in channels with more multi-path components.”