Characterizing and Patterning of PDMS‐Based Conducting Composites

By X. Niu, Suili Peng, Liyu Liu, Weijia Wen, Ping Sheng. 2007

391 citations recorded by the source corpus.

View Paper: https://www.semanticscholar.org/paper/ee76c260a9c905bfee716d1c99cccf43153db86d

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomedical Engineering

Citations in the corpus

Fabrication methods and applications of microstructured gallium based liquid metal alloys (2016, background): “polypyrrole-poly (ethylene-co-vinyl acetate) composites [4], PDMS—CNT/graphene conducting polymers [5–9], silvernanowire (AgNW)—polyacrylate composite [10], PDMS— Ag conducting composites [11, 12], cellulose—indium tin oxide (ITO) electrodes [13], polyurethane/PEDOT:PSS conductive composite [14] etc”
iSkin: Flexible, Stretchable and Visually Customizable On-Body Touch Sensors for Mobile Computing (2015, background): “Its resistance is as high as 100 Ω m [22] and further decreases when it is being stretched (it even takes several hours to go back to its initial resistance).”
Recent advances in synthesis, physical properties and applications of conducting polymer nanotubes and nanofibers (2011, neutral): “nique [77–80].”
CNT/PDMS Composite Flexible Dry Electrodesfor Long-Term ECG Monitoring (2012, methodology): “stretched at a constant speed of 1 mm/s from 1 to 9 mm (5–45% strain) [29], [30], and the surface resistance was measured in situ using the four-point probe.”
Simple and rapid micropatterning of conductive carbon composites and its application to elastic strain sensors (2014, background): “[19] Niu X, Peng S, Liu L, Wen W, Sheng P.”
The Boom in 3D-Printed Sensor Technology (2017, background): “Planar-printing [103], lithographic [104], coating [105] and lamination [8] techniques can all be used to create soft strain sensors.”
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review (2015, background): “In this printing process the conventional photolithography technique is used to get micro and nano wires of Si on the wafers itself and then transferring them onto flexible substrates through a PDMS stamp [109]–[111], [157], [158].”
Flexible Tactile Sensors Using Screen-Printed P(VDF-TrFE) and MWCNT/PDMS Composites (2015, background): “This leads to a change in resistance of the bulk composite layer [28], [29], [38].”