Closed loop pulsating heat pipes: Part A: parametric experimental investigations

By P. Charoensawan, S. Khandekar, M. Groll, Pradit Terdtoon. 2003

424 citations recorded by the source corpus.

Subfields: Computational Mechanics, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/e7f4cff512d62a91562bef00508205c1a5f92b36

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Computational Mechanics

In Mechanical Engineering

Citations in the corpus

Advances and Unsolved Issues in Pulsating Heat Pipes (2008, methodology): “[23] performed visualizations and proposed a semi-empirical model based on 248 experimental data from [34].”
A novel design of pulsating heat pipe with fewer turns applicable to all orientations (2012, background): “Although an addition of check valves [10] can make the working fluid move in a specific direction or increased numerous turns [7].”
Design and operation of a Tesla-type valve for pulsating heat pipes (2017, neutral): “This influence is believed to be reduced when the overall size decreases and the number of turns increases [19,21].”
Local heat transfer measurement and thermo-fluid characterization of a pulsating heat pipe (2014, neutral): “[15] and Khandekar et al.”
Thermal performance of horizontal closed-loop oscillating heat pipes (2008, methodology): “At Te of 60 C, the critical number of turns to start the work of the HCLOHPs with a 2 mm Di, increased to 16 which corresponded to the previous result [2].”
Operational limit of closed loop pulsating heat pipes (2008, background): “While quite some research has been performed on the operational behavior and physical phenomena in PHPs, including various experimental studies [5–12] and attempts of mathematical modeling [13–18], rather limited knowledge exists on the ultimate performance or performance limits of PHPs [19–22].”
Closed loop pulsating heat pipes Part B: visualization and semi-empirical modeling (2003, methodology): “In Part A of this paper, the experimental set-up and plan was outlined for the quantitative measurements performed on CLPHPs made of copper tubes [12].”