Experimental analysis of tribological properties of lubricating oils with nanoparticle additives

By Yuh-Yih Wu, W. Tsui, T. Liu. 2007

846 citations recorded by the source corpus.

Subfields: Mechanical Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/e30cf117c0e9097ed1f971ca878b08fb8a5a528a

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Mechanical Engineering

1. V. Jatti
2. Han Huang
3. H. Spikes
4. R. Jackson
5. Zhengyi Jiang
6. H. Masjuki
7. Jingwei Zhao
8. J. M. Khodadadi

In Mechanics of Materials

1. V. Jatti
2. H. Spikes
3. R. Jackson
4. Zhengyi Jiang

Citations in the corpus

• A study of the tribological behaviour of TiO2 nano-additive water-based lubricants (2017, background): “Due to the special physical and chemical properties of nanomaterials, considerable studies have been conducted in recent years using nanoparticles as additives in lubricating oil to improve the tribological properties of lubricants [3-22].”
• Copper oxide nano-particles as friction-reduction and anti-wear additives in lubricating oil (2015, background): “Copper oxide nanoparticles are also being investigated by some researchers in context of their tribological and anti-wear properties [3, 4].”
• Effect of Nano Hexagonal Boron Nitride Lubricant Additives on the Friction and Wear Properties of AISI 4140 Steel (2013, background): “2007), and others (Xue et al. 1997; Chen et al. 1998; Sunqing et al. 1999; Liu and Chen 2000; Rapoport et al. 2003; Hernandez Battez et al. 2006; Wu et al. 2007; Gu et al. 2008; Hernández Battez et al. 2008; Yang et al. 2009; Hernández Battez et al. 2010; Peng et al. 2010), have been reported in the”
• Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel (2018, background): “[44] studied the friction-reduction properties of lubricating oils with nano-additives including nano-CuO, nano-TiO2 and nano-diamond, and found that the base oil containing nano-TiO2 presented the lowest COF because it had the highest viscosity of the tested lubricants.”
• Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions (2013, background): “The tribological properties of ZnO [12–14], ZrO2 [13–15], TiO2 [16,17], SiO2 [7] and CuO [13,14,17] were investigated.”
• Tribological performance of nanoparticles as lubricating oil additives (2016, background): “These mechanisms include the ball bearing effect (Chiñas-Castillo and Spikes 2003; Rapoport et al. 2002; Wu et al. 2007), protective film formation (Ginzburg et al. 2002; Hu et al. 2002; Xiaodong et al. 2007), mending effect (Liu et al. 2004), and polishing effect (Tao et al. 1996).”