Influence of torrefaction on the grindability and reactivity of woody biomass
By B. Arias, C. Pevida, J. Fermoso, M. Plaza, F. Rubiera, J. J. Pis. 2008
790 citations recorded by the source corpus.
Abstract The use of biomass to produce energy is becoming more and more frequent as it helps to achieve a sustainable environmental scenario. However the exploitation of this fuel source does have drawbacks that need to be solved. In this work, the torrefaction of woody biomass (eucalyptus) was studied in order to improve its properties for pulverised systems. The process consisted in a heating treatment at moderate temperature (240, 260, 280 °C) under an inert atmosphere. The grindability of raw biomass and the treated samples was compared and an improvement in the grindability characteristics was observed after the torrefaction process. Thermogravimetric analysis of the samples was carried out in order to study their reactivity in air. The DTG curves of the torrefied biomass showed a double peak nature. The kinetic parameters were calculated for each reaction stage. The torrefaction process was found to influence the parameters of the first stage, whereas those corresponding to the second remained unaffected.
Subfields: Biomedical Engineering, Mechanical Engineering, Mechanics of Materials
View Paper: https://www.semanticscholar.org/paper/e2007a9aa93ed4ecb6c13b40294daf9e991121cc
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomedical Engineering
In Mechanical Engineering
- C. Jang
- Kyung-Ryul Baek
- João C. O. Matias
- Wei-hsin Chen
- Sang-Woo Park
- Animesh Dutta
- Radu Godina
- Jae-Kyung Yang
In Mechanics of Materials
- João C. O. Matias
- Po-Chih Kuo
- Wei-hsin Chen
- Radu Godina
- Junmeng Cai
- A. Bridgwater
- Zhengang Liu
- Yang Yang
Citations in the corpus
- Effect of Torrefaction Process Parameters on Biomass Feedstock Upgrading (2010, methodology): “In addition, storing such enormous amounts of wet biomass will further increase expenses through high rate of dry matter loss due to microbial activity and hazard of self-heating/combustion (Biomass Research Committee, 2007; Bridgeman et al., 2008; Arias et al., 2008, Lipinsky et al. 2002).”
- An experimental analysis on property and structure variations of agricultural wastes undergoing torrefaction (2012, background): “It has also been reported that the ignitability, reactivity and grindability of torrefied biomass are better compared to their parent one [20,22,23].”
- Torrefaction and low-temperature carbonization of woody biomass: evaluation of fuel characteristics of the products. (2012, background): “This result is very similar to that obtained in a previous study on the torrefaction of woody biomass [6].”
- Pelletizing properties of torrefied spruce (2011, background): “[4] Arias B, Pevida C, Fermoso J, Plaza MG, Rubiera F, Pis JJ.”
- Review of physicochemical properties and analytical characterization of lignocellulosic biomass (2017, methodology): “Several studies used the HGI test for coal on biomass [36-41].”
- A study on torrefaction of various biomass materials and its impact on lignocellulosic structure simulated by a thermogravimetry (2010, background): “[17] studied the impact of torrefaction on the grindability and reactivity of wood biomass used in pulverized systems.”