Microfabrication meets microbiology
By D. Weibel, Willow R Diluzio, George M. Whitesides. Nature Reviews Microbiology, 2007
781 citations recorded by the source corpus.
Subfields: Biomedical Engineering
View Paper: https://www.semanticscholar.org/paper/de9f6f1b068d178e8a6a09e5e976cbb513a05953
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomedical Engineering
- M. Nikkhah
- Ali Khademhosseini
- A. Kalbasi
- Yuze Wang
- Navid Rabiee
- Alexandre Kabla
- B. Nasseri
- Faramarz Edalat
Citations in the corpus
- Engineering microscale topographies to control the cell–substrate interface (2012, methodology): “The patterned elastomer can then be used to create topographies via replica molding, micromolding in capillaries, microtransfer molding, and microfluidics [57-59].”
- Properties and Applications of PDMS for Biomedical Engineering: A Review (2021, methodology): “With the introduction of polymers in microsystems, new manufacturing techniques have been studied, such as soft-lithography, which can be a cheaper method comparatively to photolithography, even when a costly mould is needed for patterning; once a mould is created, it can be reused several times [20”
- Point-of-care microfluidic devices for pathogen detection (2018, background): “The development of these “microfluidic chips” has been particularly relevant in the microbiology field as well as in the diagnosis of infectious diseases repetition (Weibel et al., 2007).”
- A microfluidic chip and its use in characterising the particle-scale behaviour of microbial-induced calcium carbonate precipitation (MICP) (2018, background): “Polydimethylsiloxane (PDMS) is the most commonly used material to date owing to its low cost, easy fabrication, flexibility, and optical transparency (Sia and Whitesides, 2003; Weibel et al., 2007).”
- A shear gradient–dependent platelet aggregation mechanism drives thrombus formation (2009, methodology): “We fabricated microchannels in polydimethylsiloxane (Sylgard) from a KMPR 1025 (polymethylglutarimide) photoresist (MicroChem) mold on a 3-inch silicon wafer according to a modification of a published metho”