Alkali-activated materials
By J. Provis. Cement and Concrete Research, 2018
1,987 citations recorded by the source corpus.
Abstract This paper, which forms part of the UNEP White Papers series on Eco-Efficient Cements, provides a brief discussion of the class of cementing materials known as ‘alkali-activated binders’, which are identified to have potential for utilization as a key component of a sustainable future global construction materials industry. These cements are not expected to offer a like-for-like replacement of Portland cement across its full range of applications, for reasons related to supply chain limitations, practical challenges in some modes of application, and the need for careful control of formulation and curing. However, when produced using locally-available raw materials, with well-formulated mix designs (including in particular consideration of the environmental footprint of the alkaline activator) and production under adequate levels of quality control, alkali-activated binders are potentially an important and cost-effective component of the future toolkit of sustainable construction materials.
Subfields: Building and Construction, Civil and Structural Engineering, Materials Chemistry
View Paper: https://www.semanticscholar.org/paper/d59b36eaddfaa4eedcf48105b9b368a9fe50abae
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Building and Construction
- M. Soutsos
- Mariam Abdulkareem
- Jouni Havukainen
- J. Nuortila‐Jokinen
- Mika Horttanainen
- Tanakorn Phoo-ngernkham
- Sakonwan Hanjitsuwan
- Zhenming Li
In Civil and Structural Engineering
- M. Soutsos
- Zhenming Li
- Guang Ye
- M. Nedeljković
- Sakonwan Hanjitsuwan
- P. Chindaprasirt
- Tanakorn Phoo-ngernkham
- Mariam Abdulkareem
In Materials Chemistry
- M. Soutsos
- Guang Ye
- Zhenming Li
- Mariam Abdulkareem
- Jouni Havukainen
- J. Nuortila‐Jokinen
- Mika Horttanainen
- Sakonwan Hanjitsuwan
Citations in the corpus
- Mechanisms of autogenous shrinkage of alkali-activated slag and fly ash pastes (2020, methodology): “widely used raw materials for synthesizing AAMs [1,4].”
- Environmental and economic perspective of waste-derived activators on alkali-activated mortars (2021, background): “By and large, AABs are produced by reacting solid aluminosilicate raw materials (precursor) with an alkaliactivator to form a hardened binder (Tong et al., 2018; Vinai and Soutsos, 2019).”
- Technologies and policies to decarbonize global industry: Review and assessment of mitigation drivers through 2070 (2020, background): “materials are expected to yield lower GHG emissions than conventional Portland cement [56].”
- Advances in alkali-activation of clay minerals (2020, background): “Another research priority is admixtures – it is well established that the current range of admixtures can exert a lesser degree of control for alkali-activated systems compared to Portland cement based systems [1].”
- Application of alkali-activated materials for water and wastewater treatment: a review (2019, background): “Alkali-activated materials (AAMs), and geopolymers as their subgroup, are generally known as alternative low-CO2 binders, which can be used instead of Portland cement in construction (Provis 2014a, 2018).”
- Pore solution composition of alkali-activated slag/fly ash pastes (2019, background): “Therefore, AAMs show very promising potential for utilization 35 to embrace a sustainable future global construction materials industry [2].”