Characteristics of laser aided direct metal/material deposition process for tool steel
By J. Choi, Y. Chang. 2005
192 citations recorded by the source corpus.
Subfields: Automotive Engineering, Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/cefe211d6319591a7e52d4156f91da52fc1a7df8
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Automotive Engineering
In Mechanical Engineering
Citations in the corpus
- Research on the processing experiments of laser metal deposition shaping (2007, unknown): “As a result, successive layers are then stacked to produce the entire component volume of fused metal representing the desired CAD model [4,5], thereby building a three-dimensional component additively.”
- Steels in additive manufacturing: A review of their microstructure and properties (2020, background): “For as-DED-produced material, the hardness (550HV to 660HV [164,175,179]), the UTS (~2000 MPa) and the elongation at fracture (5–6%) are similar to those of quenched and tempered wrought material, reflecting its in-situ tempered state [169].”
- Additive manufacturing of Ti6Al4V alloy: A review (2019, background): “Usually, slowing down the scan speed and increasing the laser power will alleviate the formation of gas pores to some extent but can hardly eliminate them thoroughly [95,98].”
- Laser powder deposition (2009, background): “laser-aided direct metal/material deposition ( Choi and Chang, 2005”
- High density selective laser melting of Waspaloy (2008, background): “It has been demonstrated that low porosity can be achieved with higher laser powers, implying that the pore/void level can be reduced with extra heat input [5].”
- Assembly Based Methods to Support Product Innovation in Design for Additive Manufacturing: An Exploratory Case Study (2015, unknown): “Restrictive DFAM methods aim to take into account the limits of AM, such as usable materials and their properties [45,51,54], the performance and characteristics of AM machines [53], or product manufacturability [42].”
- Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures (2013, methodology): “Ti-based Ti–6Al–4V [20–22], Fe-based stainless steel [23,24] and tool steel [25,26], Nibased Inconel 625 [27], Inconel 718 [28] and Waspaloy [29,30], have been successfully processed by LMD.”