Metal fatigue in engineering
By R. I. Stephens, H. O. Fuchs. 2001
1,803 citations recorded by the source corpus.
View Paper: https://www.semanticscholar.org/paper/cd74226b6de5cfe5b574d2d5343a561c29859de8
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
- Kondagokuldoss Prashanth
- U. Ramamurty
- J. Eckert
- S. Scudino
- J. Suryawanshi
- Marco Antonio Meggiolaro
- J. Castro
- Scott M. Thompson
Citations in the corpus
- Strain-controlled fatigue properties of steels and some simple approximations (2000, background): “1400 MPa is thought to be due to the role of inclusions [9].”
- A general phase-field model for fatigue failure in brittle and ductile solids (2021, background): “Material fatigue is a weakening phenomenon caused by cyclic loading whose failure state is far below the material strength of monotonic loading [1, 2].”
- Fatigue properties of a pseudoelastic NiTi alloy: Strain ratcheting and hysteresis under cyclic tensile loading (2014, background): “It is a unusual behavior if compared with commonmetals, where the stabilization of the stress–strain response of the material, due to repeated plastic deformations, is related to the cycles to failure and, consequently, to the strain amplitude [44].”
- Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect (2017, methodology): “Therefore, the test results of AM materials are correlated better using criteria such as maximum principal stress, which are more suitable for brittle behaving materials [49].”
- Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel (2017, background): “(3), in which the strain amplitude is related to the fatigue life [13]:”
- Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting (2016, background): “This is possibly due to the low YS of the former, which results in a substantially larger cyclic plastic zone ahead of the crack-tip, which in turn, results in plasticity-induced crack closure and hence elevates DKth by reducing the ’driving force’ of the fatigue crack growth [35,36].”