Design considerations for 60 GHz CMOS radios

By Chinh H. Doan, Sohrab Emami, D. Sobel, Ali M. Niknejad, Robert W. Brodersen. IEEE Communications Magazine, 2004

335 citations recorded by the source corpus.

Subfields: Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/538217ac842c91346b6e22ead35c1b6f5e354313

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Electrical and Electronic Engineering

Citations in the corpus

Indoor Office Wideband Millimeter-Wave Propagation Measurements and Channel Models at 28 and 73 GHz for Ultra-Dense 5G Wireless Networks (2015, background): “Additionally, the form factor of mmWave systems and antennas will be smaller, compared to sub-6 GHz systems, making it convenient for highly-directional steerable antenna arrays to be integrated into electronic products [21]–[23].”
Hybrid Digital and Analog Beamforming Design for Large-Scale Antenna Arrays (2016, background): “This is because the implementation of fully digital beamforming requires one dedicated radio frequency (RF) chain per antenna element, which is prohibitive from both cost and power consumption perspectives at mmWave frequencies [10].”
A V-band front-end with 3-D integrated cavity filters/duplexers and antenna in LTCC technologies (2006, neutral): “Digital Object Identifier 10.1109/TMTT.2006.877440 sensor [1]–[3].”
Millimeter-Wave Propagation Channel Characterization for Short-Range Wireless Communications (2009, background): “Also, significant advances have recently taken place in the state-of-the-art 60-GHz circuit technologies, enabling the development of low-cost radio devices [7], [8].”
Antenna Subset Modulation for secure millimeter-wave wireless communication (2013, background): “The implementation of beamforming in mm-Wave systems is different than in microwave systems because it is mostly analog in nature so as to reduce the power consumption of the baseband circuitry [9], [10].”
Capacity of multi-channel wireless networks: impact of number of channels and interfaces (2005, background): “For example, there is around 7 GHz of spectrum available for unlicensed use in the 60 GHz band [5], whereas the total bandwidth used in current wireless technologies, such as IEEE 802.11, is less than 500 MHz.”
Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges (2014, background): “These multiple antenna systems can be used to form very high gain, electrically steerable arrays, fabricated at the base station (BS), in the skin of a cellphone, or even within a chip [6], [10]–[17].”
Spatially Sparse Precoding in Millimeter Wave MIMO Systems (2013, methodology): “More recently, advances in mmWave hardware [7] and the potential availability of spectrum has encouraged the wireless industry to consider mmWave for the access link in outdoor cellular systems [8], [9].”
Millimeter Wave Channel Modeling and Cellular Capacity Evaluation (2013, background): “Current technology can easily support antenna arrays with 32 elements and higher [6], [10]–[17].”
An Overview of Signal Processing Techniques for Millimeter Wave MIMO Systems (2015, background): “For random multipath variations, M, Mt and Mr can be defined by replacing |[Hb]`,m|2 with E|[Hb]`,m|2.”