Heat transfer correlation for boiling flows in small rectangular horizontal channels with low aspect ratios

By H. Lee, Sang Yong Lee. 2001

284 citations recorded by the source corpus.

View Paper: https://www.semanticscholar.org/paper/49b6160ee550479401450ea155fdff45a413732e

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Mechanical Engineering

Citations in the corpus

Review of flow boiling and critical heat flux in microgravity (2015, background): “This important goal has spurred many recent research efforts to both increase and predict CHF using a variety of boiling configurations, including pool [2,3], channel flow [4,5], mini/micro-channel [6], spray [7,8], and jet [9–11], as well as hybrid cooling configurations [12,13].”
A composite heat transfer correlation for saturated flow boiling in small channels (2009, background): “Figure 2: Comparison between trends in the measurements and those from the proposed correlation for data from (a) Bertsch et al. [35], (b) Lee and Lee [14], (c) Lin et al. [27], and (d) Qi et al. [32].”
Boiling heat transfer in rectangular microchannels with reentrant cavities (2005, background): “The correlation of Lee and Lee [ 32 ], recommended for convective boiling, excessively overpredicted the results by 608% (MAE).”
Measurement and correlation of critical heat flux in two-phase micro-channel heat sinks (2004, background): “These include boiling incipience [1,2], dominant flow patterns [3–5], hydrodynamic instability [6–9], heat transfer [10–14], and pressure drop [9,12,15–19].”
Effect of tube diameter on boiling heat transfer of R-134a in horizontal small-diameter tubes (2005, background): “Lee and Lee [10] studied flow boiling of refrigerant R-113 in three different rectangular channels (20 mm · 0.”
Flow boiling heat transfer in two-phase micro-channel heat sinks––I. Experimental investigation and assessment of correlation methods (2003, background): “Lee and Lee [18] (2001) 3 single rectangular channels 20 mm wide”
Universal approach to predicting saturated flow boiling heat transfer in mini/micro-channels - Part II. Two-phase heat transfer coefficient (2013, unknown): “All rights reserved. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2013.04.014 ⇑ Corresponding author.”