Microstructural, physico-chemical and mechanical characterisation of Sansevieria cylindrica fibres – An exploratory investigation

By V. S. Sreenivasan, S. Somasundaram, D. Ravindran, V. Manikandan, R. Narayanasamy. 2011

363 citations recorded by the source corpus.

Subfields: Biomaterials, Plant Science, Polymers and Plastics

View Paper: https://www.semanticscholar.org/paper/3f311707663bde1aaca23eaea2febeabdd980a29

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomaterials

In Plant Science

In Polymers and Plastics

Citations in the corpus

Chemical Composition and Mechanical Properties of Natural Fibers (2020, background): “The strength and stiffness of the plant and plant fibers depended on the cellulose content (Akil et al., 2011; Sreenivasan et al. 2011).”
Characterization of new cellulose sansevieria ehrenbergii fibers for polymer composites (2013, methodology): “14% and lower than the sansevieria cylindrica of 60%.[6]”
Synthesis and characterization of cellulosic fiber from red banana peduncle as reinforcement for potential applications (2019, methodology): “The lignin content of the RBPF was calculated according to the Klason method (Sreenivasan et al. 2011).”
Mechanical Properties of Hybrid Fibers-Reinforced Polymer Composite: A Review (2016, neutral): “09 — [43] Rhectophyllum camerunense 68.”
Characterization of natural fiber and composites – A review (2013, methodology): “Also, crystallite size was estimated using Scherrer’s formula, which was around 86 nm. Sreenivasan et al.60 concluded that the fiber was subjected to various chemical treatments such as alkaline, benzoyl peroxide, potassium permanganate, and stearic acid.”
Characterization of New Natural Cellulosic Fiber from the Bark of Dichrostachys Cinerea (2018, background): “The band region between 1459 cm−1 and 1319 cm−1 ensures the CH bonding of lignin (Sreenivasan et al. 2011).”
Morphology, Structure, and Mechanical Properties of Natural Cellulose Fiber from Mendong Grass (Fimbristylis globulosa) (2014, methodology): “(4) The crystalline size (L) was calculated using the Scherrer’s formula [Equation (5)] (Sreenivasan et al. 2011): L = (K ′′C ′′) /C ′′C ′′ cos( ), (5) where L is the crystal dimension at the (h k l) lattice plane of diffraction; K = 0.89 is the Scherrer’s constant (shape factor) (Sreenivasan et…”
Physicochemical Properties of New Cellulosic Fibers from Azadirachta indica Plant (2018, methodology): “The wax percentage of the AIFs was appraised by the Conrad method (Sreenivasan et al. 2011).”
Characterization of New Natural Cellulosic Fiber from Acacia leucophloea Bark (2015, background): “The bending vibration C–H and C–O group of the aromatic ring of hemicellulose and lignin were observed at 1428 and 1377 cm 1 stretching vibration.([25])”
Characterization of the Chemical, Physical, and Mechanical Properties of NaOH-treated Natural Cellulosic Fibers from Corn Husks (2018, methodology): “89 is Scherrer’s constant (Sreenivasan et al. 2011), β is the full width at half maximum of the peak in radians, λ is the X-ray wavelength used for the measurement, and θ is the Bragg angle.”
A review on synthesis and characterization of commercially available natural fibers: Part II (2019, background): “XRD reveals the presence of cellulose Iβ in the Sansevieria cylindrica fibers and also has a CI of 60% (Sreenivasan et al. 2011).”