Characterization of new cellulose sansevieria ehrenbergii fibers for polymer composites

By T. Sathishkumar, P. Navaneethakrishnan, Subramaniam Shankar, R. Rajasekar. 2013

270 citations recorded by the source corpus.

Subfields: Biomaterials, Polymers and Plastics

View Paper: https://www.semanticscholar.org/paper/8ce2df15b899c29aa70e67f57f52d8ab0a252d26

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Biomaterials

In Polymers and Plastics

Citations in the corpus

Characterization of New Natural Cellulosic Fiber from Acacia leucophloea Bark (2015, methodology): “7°C indicating the thermal depolymerization of wax and other substance in the ALFs.([15]) The activation energy Ea evaluated in the degradation temperature range of 200° 350°C by Broido’s method is represented in the following equation:”
Influence of wood dust fillers on the mechanical, thermal, water absorption and biodegradation characteristics of jute fiber epoxy composites (2019, background): “Jute fibers have a higher tendency to absorb moisture from the compost, thus causing faster biodegradation [44, 45].”
A review on synthesis and characterization of commercially available natural fibers: Part II (2019, background): “The DTG curves show that utmost peak temperature occurs at 333.02°C (Sathishkumar et al. 2013).”
Hybrid fiber reinforced polymer composites – a review (2014, unknown): “4 – – [3 9 ]”
Synthesis and characterization of cellulosic fiber from red banana peduncle as reinforcement for potential applications (2019, background): “…cos θ (2) where K = 0.89 is the Sherrer’s constant, λ = 0.1541 nm is the wavelength of the radiation, β is the peak’s full-width at half-maximum in radians, and θ is the corresponding Bragg angle (Amar Singh Arthanarieswaran et al. 2015; Sathishkumar et al. 2013; Singha., Shama, and Thakur 2008) .”
A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites (2014, background): “composites with addition of more than one reinforcement from natural resources, such as natural fiber/natural fiber or natural fiber/nanofiller from organic sources as an alternative to synthetic fibers [13].”
Physicochemical Properties of New Cellulosic Fibers from Azadirachta indica Plant (2018, methodology): “The content of cellulose has a significant influence on the properties of the natural fiber such as tensile strength, young’s modulus, and elongation at break (Sathishkumar et al. 2013).”
Characterization of New Natural Cellulosic Fiber from Heteropogon Contortus Plant (2018, background): “The detectable peak at 1058 cm−1 corresponding to Symmetric C-OH stretching of lignin (Fiore, Valenza, and Di Bella 2011; Sathishkumar et al. 2013; Scalici, Fiore, and Valenza 2016).”