Nanofiber-reinforced polymers prepared by fused deposition modeling
By M. Shofner, K. Lozano, F. Rodríguez-Macias, Enrique V. Barrera. 2003
469 citations recorded by the source corpus.
Subfields: Automotive Engineering, Materials Chemistry, Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/3b343e31f8f91d29e6c45bf550fd6d2e3eca1ef1
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Automotive Engineering
In Materials Chemistry
- Ignazio Blanco
- Syed H. Masood
- Weilong Cong
- Fuda Ning
- F. Rodríguez-Macias
- M. Shofner
- R. Vaidyanathan
- D. Ivanov
In Mechanical Engineering
Citations in the corpus
- Morphing in nature and beyond: a review of natural and synthetic shape-changing materials and mechanisms (2016, background): “The bar samples produced showed decreased swelling and greater tensile strength, although at the cost of increased brittleness [186].”
- Recycling of fiberglass wind turbine blades into reinforced filaments for use in Additive Manufacturing (2019, methodology): “[30] used ABS matrix to develop nano-fiber reinforced composites through FFF.”
- Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review (2021, methodology): “[22] produced vapour grown carbon fibres (VGCFs) reinforced ABS by mixing both substrates with a high shear rate in a Banbury mixer.”
- Additive manufacturing: technology, applications and research needs (2013, unknown): “Fibers, such as short glass fibers [88] and nanofibers (vapor-grown carbon fibers) [89], have been added into ABS filaments to improve the mechanical properties of the parts built using FDM.”
- Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer (2018, background): “Shofner et al.(17) increased the tensile strength and modulus of the ABS printed parts up to 39% and 60%, respectively, via adding 10% volume content of carbon nano fibers.”
- Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials (2014, unknown): “There are multiple examples of successful implementation of such material modifications for use in FDM TM [3–7].”