Direct torque control of PWM inverter-fed AC motors - a survey

By Giuseppe Buja, Marian P. Kazmierkowski. IEEE transactions on industrial electronics (1982. Print), 2004

1,362 citations recorded by the source corpus.

Subfields: Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/36df0cc5a6c9dc5b08327e2a4954c3e1812529e8

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Electrical and Electronic Engineering

Citations in the corpus

Recent Advances and Industrial Applications of Multilevel Converters (2010, methodology): “More recently some characteristics of FOC and DTC have been combined into another motor drive control method called SVM-DTC [160], that combines linear controllers and the SVM modulation stage of the FOC scheme with the load angle control concept of DTC (control of the angle between stator and rotor”
Model Predictive Direct Torque Control—Part I: Concept, Algorithm, and Analysis (2009, methodology): “One of the various methods used for controlling the machine’s torque and speed is direct torque control (DTC) [1]–[4].”
Latest Advances of Model Predictive Control in Electrical Drives—Part II: Applications and Benchmarking With Classical Control Methods (2021, background): “MP3C achieves the same torque settling time as DTC [122], [123], which is below 1 ms.”
Guidelines for the Design of Finite Control Set Model Predictive Controllers (2020, background): “of up to 250Hz to achieve the desired steady-state behavior as well as a superior dynamic performance [80].”
Maximum Efficiency per Torque Direct Flux Vector Control of Induction Motor Drives (2015, background): “The DFVC is a hybrid control scheme that combines the advantages of fast direct flux regulation (as for DTC) and current regulation as for field-oriented control schemes [5].”
An Improved Direct Torque Control for Three-Level Inverter-Fed Induction Motor Sensorless Drive (2012, background): “The merits of DTC can be summarized as fast torque response, simple structure (no need of complicated coordinate transformation, current regulation, or modulation block), and robustness against motor parameter variation [3]–[5].”
Controlled AC Electrical Drives (2008, background): “DTC also exploits vector relationships, but replaces the coordinate transformation concept of standard VC with a form of bang-bang action, dispensing with PWM current control [14].”
Multilevel Converters: Control and Modulation Techniques for Their Operation and Industrial Applications (2017, background): “Both DPC and DTC have found industrial niche for grid-connected and motor drive applications, respectively [28]–[31].”
Direct Calculation Method of Reference Flux Linkage for Maximum Torque per Ampere Control in DTC-Based IPMSM Drives (2017, methodology): “These results are estimated to be caused that the v∗o generated from RFVC composes the error of voltage drop of armature resistance, and that the optimal v∗a for MTPA control cannot be generated from optimal Ψ ∗s for MTPA control.”
Model Predictive Torque Control of Induction Motor Drives With Optimal Duty Cycle Control (2014, methodology): “To address these problems, some strategies have been investigated during the past decades, e.g., utilizing space vector modulation (SVM) [4], [9], incorporating duty cy- Manuscript received September 6, 2013; revised December 12, 2013; accepted January 23, 2014.”
Direct Torque Control of Permanent Magnet Synchronous Motor With Reduced Torque Ripple and Commutation Frequency (2011, background): “Many of them [4]–[12] employ space vector modulation (SVM) to produce continuous voltage vectors, which can adjust the torque and”