Label-free immunodetection with CMOS-compatible semiconducting nanowires

By Eric Stern, J. Klemic, D. Routenberg, Pauline N. Wyrembak, D. Turner-Evans, A. Hamilton, D. Laván, T. Fahmy, Mark A. Reed. Nature, 2007

1,324 citations recorded by the source corpus.

Subfields: Bioengineering, Biomedical Engineering

View Paper: https://www.semanticscholar.org/paper/2ed88f8763895de78b43f64a283d8cfb7c015c00

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Bioengineering

1. Aleksandar Vacic
2. Mark A. Reed
3. Eric Stern
4. Mridula Gupta
5. Zhiyong Fan
6. Manoj Saxena
7. Rakhi Narang

In Biomedical Engineering

1. Mridula Gupta
2. Manoj Saxena
3. Rakhi Narang
4. David J. Mooney
5. A. Anselmo
6. Javier Andreu-Perez
7. Aleksandar Vacic
8. Mark A. Reed

Citations in the corpus

• Palladium/silicon nanowire Schottky barrier-based hydrogen sensors (2010, background): “(1) into (2), and noting that sensor resistance is inversely proportional to the current for a constant bias Vds, yields the sensor response: Rf − R0 R0 = R R0 = C × [H2] (3)”
• Making it stick: convection, reaction and diffusion in surface-based biosensors (2008, background): “, require far fewer target molecules, and protein detection on the femtomolar level has been reporte”
• Modeling and Simulation Investigation of Sensitivity of Symmetric Split Gate Junctionless FET for Biosensing Application (2017, background): “2716102 advantages over other methods including direct transduction, high sensitivity, mass production, miniaturization and compatibility with the standard complementary metal-oxidesemiconductor (CMOS) technology [7].”
• Design Considerations of Silicon Nanowire Biosensors (2007, neutral): “Si-NW sensors have already demonstrated ultrasensitive detection of DNA [5]–[9], proteins [10], [11], pH levels [11], [12], etc.”
• MoS₂ field-effect transistor for next-generation label-free biosensors. (2014, methodology): “org 3998 PBS solution, which is a standard procedure used for demonstrating the operation of FET-based biosensors.(2,3,7,45,49) It is to be noted that detection of biomolecules from whole blood using FET biosensors has already been demonstrated using a microfluidic purification chip.”
• Comparative advantages of mechanical biosensors (2011, background): “Even for nominally similar systems, the concentration sensitivities reported for nanowire biosensors span a large range of values, from the femtomola”