Control system design

By N. Kheir. at - Automatisierungstechnik, 2001

1,105 citations recorded by the source corpus.

Subfields: Aerospace Engineering, Mechanics of Materials, Radiation

View Paper: https://www.semanticscholar.org/paper/2d849c1a834fd5fae6462db21b5c80c2a2f07435

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Aerospace Engineering

In Mechanics of Materials

In Radiation

Citations in the corpus

PID control for improving P&O-MPPT performance of a grid-connected solar PV system with Ziegler-Nichols tuning method (2016, methodology): “The settling time was correspondingly reduced from 616 ms to 380 ms, representing an increase in the overall system response by 236 ms or an equivalent percentage reduction in response time by 38.71 %”
Constrained control design for dynamic positioning of marine vehicles with control allocation (2009, background): “If a linear controller C(s) is minimum phase and biproper (as in the case of a PI and PID controller), then anti-windup can be achieved simply by implementation (Goodwin et al., 2001).”
Topology Study of Photovoltaic Interface for Maximum Power Point Tracking (2007, methodology): “The lightly damped system is a difficult control problem, as described in [24].”
Decentralized Event-Triggered Control Over Wireless Sensor/Actuator Networks (2010, neutral): “However, engineers still rely mostly on rules of thumb such as sampling with a frequency 20 times the system bandwidth, and then check if it actually works [4, 6, 7].”
The control of a free-piston engine generator. Part 2: Engine dynamics and piston motion control (2010, background): “[7] stated that “[f]eedforward control is generally agreed to be the single most useful concept in practical control-system design, beyond the use of elementary feedback ideas”, but warned that it can be sensitive to modelling errors.”
Transient Stability of Voltage-Source Converters With Grid-Forming Control: A Design-Oriented Study (2020, background): “In the second-order system, the overshoot is determined by its [44].”
Hankel-norm based interaction measure for input-output pairing (2002, methodology): “The synthesis method is the Youla parameterization of all stabilizing controllers (Goodwin et al. (2000)), i.e. the controller has a transfer function, C(z), given by C(z) = (I−Go(z)Q(z))−1Q(z) where Q(z) is any stable transfer function matrix, and where Go(z) is the nominal model.”
Regulation of Photovoltaic Voltage (2007, methodology): “According to the rule of thumb in [4], the phase margins in Table IV are not significant enough to guarantee system robustness.”
Control and Communication Challenges in Networked Real-Time Systems (2007, background): “For a general introduction to control and to linear and nonlinear system theory see [5], [49], [51], [69], [104], and [107].”
Minimizing Scanning Errors in Piezoelectric Stack-Actuated Nanopositioning Platforms (2009, background): “Polynomial-based pole placement control [15], and positive position feedback (PPF) control [16], are other popular techniques that have shown the ability to damp the resonant modes.”
Feedback Systems: An Introduction for Scientists and Engineers (2008, positive): “Fundamental results on limitations are given in Bode [41]; more recent presentations are found in Goodwin, Graebe and Salgado [85].”