Processing of strong-motion accelerograms: needs, options and consequences
744 citations recorded by the source corpus.
Subfields: Civil and Structural Engineering, Geophysics
View Paper: https://www.semanticscholar.org/paper/007939bac686d36b7a85f28c8e3d931313c846aa
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Civil and Structural Engineering
In Geophysics
Citations in the corpus
- AN IMPROVED METHOD OF MATCHING RESPONSE SPECTRA OF RECORDED EARTHQUAKE GROUND MOTION USING WAVELETS (2006, methodology): “[2000] using the peak ground motions proposed by Tromans and Bomrner [2002] notwithstanding the limitations associated with these formulations arising from their derivation using analogue recordings [Boore and Bommer, 2005].”
- On the Use of Logic Trees for Ground-Motion Prediction Equations in Seismic-Hazard Analysis (2005, background): “Regarding the frequency coverage, the analyst may also reduce the grading of an equation at low or high frequencies if there are doubts about the processing of the recordings, in particular, if these have been obtained primarily from analog accelerographs (Boore and Bommer, 2005).”
- Prediction of elastic displacement response spectra in Europe and the Middle East (2007, background): “than the filter cut-off period, of such accelerograms being limited (e.g. [ 8 ]). Ambraseys et al. [9]”
- NGA Project Strong-Motion Database (2008, background): “Acausal filtering results in fewer phase distortions as discussed in Boore and Akkar (2003), Boore and Bommer (2005), and Boore (2005).”
- Broadband (0.05 to 20 s) prediction of displacement response spectra based on worldwide digital records (2008, methodology): “Specifically, we applied fourth-order acausal filters, with cut-off frequency fc=0.05 Hz, to reduce the influence of the filter cut-off on the usable frequency range of strong motion records (see Boore 2005; Boore and Bommer 2005 ).”
- Influence of long‐period filter cut‐off on elastic spectral displacements (2006, methodology): “Bommer and Elnashai [20] re-processed all the records in the data set to produce predictive equations for elastic spectral displacement ordinates.”
- Wavelet-based response spectrum compatible synthesis of accelerograms—Eurocode application (EC8) (2009, background): “Artificial seismic accelerograms to be used in the earthquake-resistant design of structures require that certain baseline corrections must be performed as in the case of any recorded accelerogram [38].”
- Baseline correction of vibration acceleration signals with inconsistent initial velocity and displacement (2016, methodology): “9999) if we use the initial velocity and displacement estimated by equations (10) and (11), which verifies the validity of equations (10) 6 Advances in Mechanical Engineering”