S. Suwas

Mechanical Engineering · 2004–2019

A researcher in the Science corpus: 16 papers; trusts 9 researchers and is trusted by 0 researchers here, as inferred from the citation graph.

Subfields

• Mechanical Engineering — 188 citations into it
• Materials Chemistry — 169 citations into it
• Biomaterials — 96 citations into it

Whom S. Suwas trusts overall

Their strongest outbound trust, strongest first, inferred from their citations.

1. U. F. Kocks
2. V. Randlè
3. Y. Chun
4. S. Semiatin
5. Matthew Barnett
6. S. Agnew

Papers from S. Suwas's perspective

Ordered by how strongly the researchers S. Suwas trusts endorse each paper. Same corpus, a different order for every researcher.

1. Physics and phenomenology of strain hardening: the FCC case
2. Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium
3. Introduction to texture analysis : macrotexture, microtexture and orientation mapping
4. I and J
5. Phase Transformations in Metals and Alloys
6. Deformation twinning in nanocrystalline materials
7. Influence of cultivation temperature on the ligninolytic activity of selected fungal strains
8. AND T
9. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
10. Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene (Science)

Their papers

• Softening and dynamic recrystallization in magnesium single crystals during c-axis compression (2012) — 212 citations
• Room-temperature equal channel angular extrusion of pure magnesium (2010) — 259 citations
• Microstructural evolution of cold-sprayed Inconel 625 superalloy coatings on low alloy steel substrate (2017) — 153 citations
• Crystallographic Texture of Materials (2014) — 348 citations
• Evolution of crystallographic texture during equal channel angular extrusion (ECAE) and its effects on secondary processing of magnesium (2007) — 152 citations
• Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel (2019) — 208 citations
• Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness (2019) — 318 citations
• Ductility enhancement in Mg-0.2%Ce alloys (2018) — 161 citations
• Elucidating microstructural evolution and strengthening mechanisms in nanocrystalline surface induced by surface mechanical attrition treatment of stainless steel (2017) — 137 citations
• The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti–6Al–4V–0.1B (2013) — 164 citations
• Deformation behaviour of commercially pure titanium at extreme strain rates (2011) — 190 citations
• Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel (2011) — 137 citations
• Development of solidification microstructure in boron-modified alloy Ti-6Al-4V-0.1B (2011) — 154 citations
• Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling (2009) — 145 citations
• Analysis of texture evolution in magnesium during equal channel angular extrusion (2008) — 180 citations
• Analysis of texture evolution in equal channel angular extrusion of copper using a new flow field (2004) — 187 citations