Y. Chino

Biomaterials · 2001–2015

A researcher in the Science corpus: 14 papers; trusts 4 researchers and is trusted by 4 researchers here, as inferred from the citation graph.

Subfields

• Biomaterials — 90 citations into it; #1,277 of 2,152 by trust here, #318 by citations
• Mechanical Engineering — 81 citations into it; #4,485 of 8,300 by trust here, #882 by citations
• Materials Chemistry — 53 citations into it

Whom Y. Chino trusts overall

Their strongest outbound trust, strongest first, inferred from their citations.

1. J. Koike
2. S. Agnew
3. Matthew Barnett
4. M. Mabuchi
5. A. Inoue

Who trusts Y. Chino overall

1. S. Sandlöbes
2. A. Khan
3. Sylvain Deville
4. J. Nie
5. A. Imandoust
6. Zhuoran Zeng
7. D. Griffiths
8. Zhaoxuan Wu
9. A. Pandey
10. Umer Masood Chaudry

Papers from Y. Chino's perspective

Ordered by how strongly the researchers Y. Chino trusts endorse each paper. Same corpus, a different order for every researcher.

1. Physical properties of crystals
2. I and J
3. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
4. Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B
5. Marciniak–Kuczynski type modelling of the effect of Through-Thickness Shear on the forming limits of sheet metal
6. Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals
7. Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear
8. Texture evolution during annealing of magnesium AZ31 alloy
9. Microstructure evolution under compressive plastic deformation of magnesium at different temperatures and strain rates
10. Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model

Their papers

• Life cycle inventory study on magnesium alloy substitution in vehicles (2007) — 171 citations
• Twinning behavior and deformation mechanisms of extruded AZ31 Mg alloy (2008) — 218 citations
• Discharge properties of Mg–Al–Mn–Ca and Mg–Al–Mn alloys as anode materials for primary magnesium–air batteries (2015) — 166 citations
• Directionally freeze-cast titanium foam with aligned, elongated pores (2008) — 238 citations
• Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass (2011) — 153 citations
• Effects of Ca on Tensile Properties and Stretch Formability at Room Temperature in Mg-Zn and Mg-Al Alloys (2011) — 164 citations
• Texture and stretch formability of a rolled Mg–Zn alloy containing dilute content of Y (2009) — 191 citations
• Compressive deformation behavior at room temperature – 773 K in Mg–0.2 mass%(0.035at.%)Ce alloy (2008) — 206 citations
• Mechanical anisotropy due to twinning in an extruded AZ31 Mg alloy (2008) — 145 citations
• Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2 wt%(0.035 at%)Ce (2008) — 243 citations
• Enhanced formability at elevated temperature of a cross-rolled magnesium alloy sheet (2006) — 141 citations
• Novel equilibrium two phase Mg alloy with the long-period ordered structure (2004) — 146 citations
• Compressibility of porous magnesium foam: dependency on porosity and pore size (2004) — 250 citations
• Processing of biocompatible porous Ti and Mg (2001) — 628 citations