3D fine scale ceramic components formed by ink-jet prototyping process

By R. Noguéra, M. Lejeune, T. Chartier. 2005

178 citations recorded by the source corpus.

Subfields: Automotive Engineering, Computational Mechanics, Electrical and Electronic Engineering

View Paper: https://www.semanticscholar.org/paper/fa1f655e5c45f766a554af29ff70bbf203256837

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Automotive Engineering

In Computational Mechanics

B. Derby

In Electrical and Electronic Engineering

Citations in the corpus

Additive Manufacture of Ceramics Components by Inkjet Printing (2015, background): “The maximum value of fluid viscosity depends on the inkjet printhead design, but the highest viscosity liquids that have been used successfully for printing are typically in the region of 20–30 mPa·s [3, 13, 22, 23].”
Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques (2017, background): “3D features have been produced using ink-jet based printer at much lower cost than AM techniques.[66-68] Herein, membrane fabrication based on ink-jet printing, which may or may not possess 3D features are discussed.”
Effects of layer thickness and binder saturation level parameters on 3D printing process (2011, background): “3D printing has demonstrated the capability of fabricating parts of a variety of materials, including ceramics, metals, shape memory alloys (SMA), and polymers with an array of unique geometries [5–11].”
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing (2015, background): “This volumetric change causes pressure/velocity transients to occur within the fluid, and these are directed to produce a drop that issues from the nozzle [98].”
Ceramic Fabrication Using Mask-Image-Projection- based Stereolithography Integrated with Tape-casting (2015, background): “The direct inkjet printing process [2,3] is a simple and potenially fast approach for building ceramic components with complex hapes.”
Review of additive manufacturing methods for high-performance ceramic materials (2019, background): “There were several studies and publications that used inkjet technology with thermal drop-on-demand (DOD) to produce ceramic objects [21, 22].”