Morphology of the pore space in claystones - evidence from BIB/FIB ion beam sectioning and cryo-SEM observations
By G. Desbois, J. Urai, P. Kukla. 2009
228 citations recorded by the source corpus.
The morphology of pore space has a strong effect on mechanical and transport properties of mudrocks and clay-rich fault gouge, but its characterization has been mostly indirect. We report on a study of Boom clay from a proposed disposal site of radioactive waste (Mol site, Belgium) using high resolution SEM at cryogenic temperature, with ion beam cross-sectioning to prepare smooth, damage free surfaces. Pores commonly have crack-like tips, preferred orientation parallel to bedding and power law size distribution. We define a number of pore types depending on shape and location in the microstructure: large jagged pores in strain shadows of clastic grains, high aspect ratio pores between similarly oriented phyllosilicate grains and crescent-shaped pores in saddle reefs of folded phyllosilicates. 3-D reconstruction by serial cross-sectioning shows 3-D connectivity of the pore space. These findings offer a new insight into the morphology of pores down to nano-scale in comparison to traditional pore size distributions calculated from mercury Injection experiments, explain slaking of clays by successive wetting and drying and provide the basis for microstructurebased models of transport in clays.
Subfields: Geophysics, Mechanics of Materials
View Paper: https://www.semanticscholar.org/paper/f8d51bad14f9532cfd7694545fa4b738d015b8f2
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
- J. Konstanty
- C. Baerle
- P. Kukla
Citations in the corpus
- High-resolution 3D fabric and porosity model in a tight gas sandstone reservoir:A new approach to investigate microstructures from mm- to nm-scale combining argon beam cross-sectioning and SEM imaging (2011, methodology): “Focused Ion Beam (FIB) cutting was also demonstrated to be able to prepare high quality polished cross-sections in clay-rich geomaterials (Holzer et al., 2007, 2010; Desbois et al., 2009; Dvorkin, 2009).”