Carbon nanotube-filled polycarbonate composites produced by melt mixing and their use in blends with polyethylene

300 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Heat transfer in microcellular polystyrene/multi-walled carbon nanotube nanocomposite foams (2015, background): “The prolonged mixing time can enhance the polymer chains’ diffusion between the matrix and the MWCNT aggregates of the masterbatch, but because of strong shear that occurs during that extended mixing period, the MWCNT’s lengths will be decreased [55].”
Conductive network formation in the melt of carbon nanotube/thermoplastic polyurethane composite (2009, unknown): “with equivalent CNT loading below 1%.[9, 10 ] It is been noticed that the very low percolation thresholds are always achieved with a low viscosity system [11], while with the melt process”
Rheological properties and percolation in suspensions of multiwalled carbon nanotubes in polycarbonate (2009, methodology): “It is also found that the percolated nanotube network is very sensitive to the temperature ( Potschke et al. 2004b ; W u et al. 2007a).”
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties (2010, methodology): “Furthermore, the addition of MWCNTs to the polyester matrix PC by the melt mixing technique induces a dramatic increase of about 16 orders of magnitude in the maximum conductivity; reaching the value of ≈1000 S/m at 15 wt% [404].”