On energy harvesting from ambient vibration

By N. Stephen. 2006

925 citations recorded by the source corpus.

Subfields: Electrical and Electronic Engineering, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/f4a450cb2f44470df0dc6215fa93fde9adb5018e

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Electrical and Electronic Engineering

In Mechanical Engineering

Citations in the corpus

Impedance Modeling and Analysis for Piezoelectric Energy Harvesting Systems (2012, neutral): “Various researchers have made conflicting claims [16].”
An electromechanical finite element model for piezoelectric energy harvester plates (2009, methodology): “The lumped parameter solution [20] have been found useful for a fundamental understanding of the problem and to investigate the optimization of system parameters for better electrical outputs [27,28].”
Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems (2008, background): “The expression for the optimal value for RLoad, R′ Load, has been determined to be [199]”
The benefits of Duffing-type nonlinearities and electrical optimisation of a mono-stable energy harvester under white Gaussian excitations (2012, background): “Subsequently, the dynamic response and power output of other linear single-degree-of-freedom (SDOF) system devices to harmonic base excitations were analysed in several works (for example, [3], [4], [5] and [6]).”
Comparison of energy harvesting systems for wireless sensor networks (2008, background): “It can then be shown that the maximum electrical power delivered to a matched load when tuned to the frequency of the vibration source is [70, 74, 75 ]”
A review of energy harvesting using piezoelectric materials: state-of-the-art a decade later (2008–2018) (2019, background): “Most of the original works on mathematical modeling of piezoelectric energy harvesting utilized simple single degree of freedom lumped parameter modeling approaches [22, 279, 280].”
Enhanced Vibrational Energy Harvesting Using Non-linear Stochastic Resonance (2008, background): “Energy harvesting has emerged as an important new topic with the goal of fabricating devices that can generate electrical power by exploiting ambient vibrational energy [11] or thermal gradients [12].”
Issues in mathematical modeling of piezoelectric energy harvesters (2008, background): “The Williams and Yates model [2] has led to extended discussions on the power output and the effect of mechanical damping in the vibration energy harvesting literature [3].”
Review of Microscale Magnetic Power Generation (2007, methodology): “source of significant variation is that many of the previous devices were using a “matched load” that optimized power transfer to the electrical domain, rather than power delivered to the load [61].”
Energy harvesting from vibrations with a nonlinear oscillator (2010, background): “Many existing vibration-powered energy harvesting devices are designed around the principle of linear resonance [1–5] where an inertial mass mounted on a spring-damper is excited at the resonant frequency of the spring.”
A micro electromagnetic low level vibration energy harvester based on MEMS technology (2009, background): “The relevant theoretical analysis about energy conversion has been well reported (Williams and Yates 1996; Stephen 2006; Beeby et al. 2007) and will just be simply summarized in the following.”
A wideband vibration-based energy harvester (2008, methodology): “Therefore, we can write the RMS voltage across the load as [20]”