Experimental studies on selective laser melting of metallic parts

By Horst Meier, C. Haberland. 2008

220 citations recorded by the source corpus.

Subfields: Automotive Engineering, Computational Mechanics, Mechanical Engineering

View Paper: https://www.semanticscholar.org/paper/f3b93415f54561b4e5e7ab1b9b54d62e50966f89

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Automotive Engineering

In Computational Mechanics

In Mechanical Engineering

Citations in the corpus

Process defects and in situ monitoring methods in metal powder bed fusion: a review (2017, unknown): “…2012; Zeng, 2015 Orientation Li et al., 2012; Strano et al., 2013; Delgado et al., 2012 Delgado et al., 2012; Fox et al., 2016; Strano et al., 2013 Meier and Haberland, 2008 Feedstock material (powder) Liu et al., 2015; Van Elsen, 2007; Das, 2003 Das, 2003 Seyda et al., 2012 Das, 2003; Niu and…”
Research status of laser additive manufacturing for metal: A review (2021, methodology): “parameters on properties of 316L stainless steel (X2CrNiMo1713-2) produced by SLM method [69].”
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties (2012, background): “For an austenitic stainless steel, Meier [36] reported the tensile strength and elongation to be lower for samples tested in the build direction compared to horizontally built specimens.”
The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting (2016, background): “Meier and Haberland (2008) witnessed the surface quality of vertical walls to be lower than the horizontal surfaces due to partially melted particles.”
Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes (2015, background): “Meier and Haberland investigated various process parameters to evaluate their influence on part density and surface quality for parts fabricated by PBF [82].”
Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting (2016, background): “Whereby the higher ductility for vertical build SLM samples is due to the typical columnar grain growth with orientation parallel to the direction of the load [13–15].”