A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: Morphology, microstructure and mechanical properties

By Shang-Ping Li, Gaoyang Mi, Chunming Wang. 2020

191 citations recorded by the source corpus.

Abstract Laser beam oscillating welding was used to connect 5083 aluminum alloy sheets. The effect of oscillating parameters on the weld porosity and morphology was investigated. When the oscillating frequency was over 200 Hz and the oscillating diameter was over 2 mm, the weld porosity could be suppressed by laser beam oscillation. The microstructure analysis conducted by electron backscattered diffraction and an electron probe micro-analyzer revealed that the laser beam oscillation could refine grains and promote the uniform distribution of the β(Mg2Al3) phase in the weld fusion zone, thus leading to increasing micro-hardness of the weld zone. The tensile test results demonstrated that the tensile strength and the elongation of the laser oscillating welding joints were much higher than the joints without oscillation, mainly owing to the suppression of porosity.

Subfields: Aerospace Engineering, Mechanical Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/edeff6f90c6f8e36f82b2176ba5af9b25cd92b98