Brownian motion of nanoparticles in a triangular enclosure with natural convection
By Behzad Ghasemi, Saiied M. Aminossadati. 2010
223 citations recorded by the source corpus.
Subfields: Biomedical Engineering, Computational Mechanics, Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/ec42e717b22194960f86514edfe8a485a1de819d
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Biomedical Engineering
- Ali J. Chamkha
- E. Abu‐Nada
- Hussein A. Mohammed
- Behzad Ghasemi
- Saiied M. Aminossadati
- A. Raisi
- H. Seyf
- M. Wahid
In Computational Mechanics
- Ali J. Chamkha
- E. Abu‐Nada
- Hussein A. Mohammed
- Husam Abdulrasool Hasan
- M. Wahid
- Morteza Feizbakhshi
- H. Seyf
- Behzad Ghasemi
In Mechanical Engineering
- Ali J. Chamkha
- E. Abu‐Nada
- Hussein A. Mohammed
- Behzad Ghasemi
- Saiied M. Aminossadati
- A. Raisi
- M. Wahid
- H. Seyf
Citations in the corpus
- Mixed convection flow in single- and double-lid driven square cavities filled with water–Al2O3 nanofluid: Effect of viscosity models (2012, methodology): “[23] and Khanafer and Chamkha [24] for Gr = 100 and Re = 400 (c) average Nusselt number with the work of Ghasemi and Aminossadati [46].”
- Magnetic field effect on natural convection in a nanofluid-filled square enclosure (2011, result): “The present code is also validated for natural convection of nanofluids in a square enclosure against other studies reported in the literature [27,28].”
- Effect of nanofluid variable properties on natural convection in enclosures filled with a CuO–EG–Water nanofluid (2010, methodology): “Another validationwas carried out for the caseof nanofluid by comparing the current code results against the work of Oztop and Abu-Nada [9] and Ghasemi and Aminossadati [11] for the range of 103< R< 105 as shown in Fig.”
- A Review of Thermal Conductivity Models for Nanofluids (2015, unknown): “5 W/mK [110], 20 W/mK [108], 17.”
- Mixed convection flow of a nanofluid in a lid-driven cavity with a wavy wall (2014, methodology): “Validation against the work of Ghasemi and Aminossadati [34] using Cu–water Nanofluid.”
- Heat transfer enhancement of nanofluids in a double pipe heat exchanger with louvered strip inserts (2013, methodology): “The effective heat capacity at constant pressure of nanofluid can be calculated from the following equation [39]:”
- Computational analysis of nanofluid effects on convective heat transfer enhancement of micro-pin-fin heat sinks (2012, result): “It is worth mentioning that Ghasemi and Aminossadati [29] recently validated all of the property models used in this paper and found very good agreement between their numerical results and experimental ones.”