Cutting conditions for finish turning process aiming: the use of dry cutting

By A. Diniz, Ricardo Micaroni. 2002

212 citations recorded by the source corpus.

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Progress of Nanofluid Application in Machining: A Review (2015, background): “But in most machining situations, dry machining cannot be the preferred method with high depth of cut as it shortens tool life [5, 6].”
Surface roughness model for machining mild steel with coated carbide tool (2005, methodology): “This method has been used by some researchers for tool life and surface roughness [2–15,14,16–19].”
Optimization of surface roughness and cutting temperature in high-pressure coolant-assisted hard turning using Taguchi method (2016, result): “This result has inclined with the conclusion of Diniz and Micaroni [33].”
The effect of cutting fluids applied in metal cutting process (2016, result): “Some researches showed the opposite results, and the experimental data indicated that dry cutting required less power and produced a smoother surface than wet cutting.(57) In these cutting conditions, it was more suitable for dry cutting, or maybe the cutting fluid was not correctly used.”
A review of cryogenic cooling in machining processes (2008, background): “It was also proved that the conventional cooling action worsened the surface roughness when compared with dry cutting [9].”