Carbon Dioxide Corrosion in Oil and Gas Production—A Compendium
By M. Kermani, A. Morshed. 2003
818 citations recorded by the source corpus.
Subfields: Environmental Engineering, Materials Chemistry, Ocean Engineering
View Paper: https://www.semanticscholar.org/paper/e790fca7d78e689a83a5057206ddf8db54cf9163
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Environmental Engineering
In Materials Chemistry
In Ocean Engineering
Citations in the corpus
- Evolution of dissolution processes at the interface of carbon steel corroding in a CO2 environment studied by EIS (2010, background): “77 Fe3C) is the most common mixture found on carbon and low-alloy steel surfaces in CO2-containing environments [47].”
- Corrosion inhibition of mild steel by ethylamino imidazoline derivative in CO2-saturated solution (2009, neutral): “However, significant progress has been achieved in understanding the mechanism of CO2 corrosion in the oil and gas industry [7,12–18], but an understanding of its inhibition mechanism and the kinetics of the inhibition process necessary to quantify formulations that will provide a desirable level of”
- Film former corrosion inhibitors for oil and gas pipelines - A technical review (2018, methodology): “Once deleted, high velocity of the fluid film does not allow the re-formation of the film (Kermani and Morshed, 2003; Schmitt, 2015).”
- Internal corrosion of carbon steel pipelines for dense-phase CO2 transport in carbon capture and storage (CCS) – a review (2017, background): “0 MPa) and has been an active area of study for the past 50 years.([37-43]) However, less research has been afforded to high pressure CO2 corrosion where CO2 is the dominant phase([44]), especially in conditions”
- Modeling of uniform CO2 corrosion of mild steel in gas transportation systems: A review (2016, background): “…conditions such as temperature and fluid flow, steel composition and microstructure, etc. (Crolet et al., 1999; Davies and Burstein, 1980; Dugstad, 1998; Gulbrandsen, 2007; Johnson and Tomson, 1991; Kermani and Morshed, 2003; Ruzic et al., 2007; Sun et al., 2009; van Hunnik et al., 1996).”
- Polymeric corrosion inhibitors for the oil and gas industry: Design principles and mechanism (2015, background): “Particularly in refinery classified corrosion, concentrated acids such as hydrochloric acid (HCl), carbonic acid and the numerous SOx acids,which include sulfuric (H2SO4), sulfurous (H2SO3), thiosulfurous, among others cause a large fraction of corrosion cases [10].”