Elastic-plastic analysis of two-dimensional functionally graded materials under thermal loading

By M. Nemat-Alla, Khaled Ahmed, I. Hassab-Allah. 2009

140 citations recorded by the source corpus.

Abstract The two-dimensional functionally graded materials, (2D-FGMs) have been recently introduced in order to significantly reduce the thermal stresses in machine elements that subjected to sever thermal loading. To the author’s knowledge no work was found that investigates the elastic–plastic stress analysis for 2D-FGMs. In the current work, a 3D finite element model of 2D-FGM plates made of ZrO 2 , 6061-T6 and Ti-6Al-4V with temperature dependent material properties has been proposed to perform such analysis. An elastic plastic stress–strain relation based on the rule of mixture of the 2D-FGM has been introduced in the model. Also, a 3D finite element model of conventional FGM plates, of ZrO 2 /Ti-6Al-4V and ZrO 2 /6061-T6, with temperature dependent material properties has been proposed for the investigation of these plates too. Then, elastic–plastic stress analysis of the considered four plates (two conventional FGMs and two 2D-FGMs) under the same transient cyclic heating and cooling was carried out. It was found that heat conductivity of the metallic constituents of FGM has great effect on the temperature distributions that resulting from the thermal loads. Minimum temperatures variation and minimum stresses can be obtained using ZrO 2 /6061-T6/Ti-6Al-4V 2D-FGM. Also, the results indicate that only ZrO 2 /6061-T6/Ti-6Al-4V 2D-FGM can stand with the adopted sever thermal loading without fracture or plastic deformations.

Subfields: Mechanical Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/e5221bd3e119e6be0bfff3b397c1f22f57267e81

Citations in the corpus