Removal of Chromium(VI) from aqueous solution using guar gum–nano zinc oxide biocomposite adsorbent

By Tabrez A. Khan, M. Nazir, Imran Ali, Ajeet Kumar. 2017

150 citations recorded by the source corpus.

Abstract Guar gum–nano zinc oxide (GG/nZnO) biocomposite was used as an adsorbent for enhanced removal of Cr(VI) from aqueous solution. The maximum adsorption was achieved at 50 min contact time, 25 mg/L Cr(VI) conc., 1.0 g/L adsorbent dose and 7.0 pH. Langmuir, Freundlich, Dubinin–Kaganer–Radushkevich and Temkin isotherm models were used to interpret the experimental data. The data obeyed both Langmuir and Freundlich models (R2 = 0.99) indicating a multilayer adsorption of Cr(VI) onto the heterogeneous surface. The linear plots of Temkin isotherm showed adsorbent-adsorbate interactions. Moreover, the energy obtained from DKR isotherm (1.58–2.24 kJ/mol) indicated a physical adsorption of the metal ions onto the adsorbent surface, which implies more feasibility of the regeneration of the adsorbent. GG/nZnO biocomposite adsorbent showed an improved adsorption capacity for Cr(VI) (qm = 55.56 mg/g) as compared to other adsorbents reported in the literature. Adsorption process followed pseudo-second order kinetics; controlled by both liquid-film and intra-particle diffusion mechanisms. Thermodynamic parameters (ΔGo, ΔHo and ΔSo) reflected the feasibility, spontaneity and exothermic nature of adsorption. The results suggested that GG/nZnO biocomposite is economical, eco-friendly and capable to remove Cr(VI) from natural water resources.

Subfields: Water Science and Technology

View Paper: https://www.semanticscholar.org/paper/e4051ef045868a5c35487005a17ceb8381687e72