Electronic excitation temperature profiles in an air microwave plasma torch

By K. Green, M. C. Borrás, P. Woskov, Iii. G.J. Flores, K. Hadidi, P. Thomas. 2001

135 citations recorded by the source corpus.

A 0.9- to 1.5-kW 2.45-GHz atmospheric pressure air microwave plasma torch has been operated efficiently with less than 1% reflected power. The plasma is sustained in a 28-mm internal diameter fused quartz tube, which penetrates perpendicularly through the wide walls of a tapered and shorted WR-284 (72/spl times/17-mm cross section) waveguide. A study has been made of the effects of power and airflow on the electronic excitation temperature, T/sub exc/. Abel inversion of radial profile chord averaged Fe I emission lines in the 370-377-nm range have been used to obtain localized profile measurements of T/sub exc/ inside the waveguide excitation region. In general, temperature profiles peak on axis with no evidence of a skin effect in the large diameter (10-mm full width at half maximum emission intensity) plasmas. A maximum central T/sub exc/ of 6550 K/spl plusmn/350 K is observed at an airflow rate of 28 Ipm. When maintaining a constant flow rate of 14 Ipm, a 55% increase in microwave power from 0.9 to 1.4 kW causes a /spl sim/100% increase in plasma volume without any noticeable effect on the central T/sub exc/ value. At a constant microwave power of 1.4 kW, an increase in total flow rate from 11 to 28 Ipm decreases the volume of the plasma by /spl sim/25% and increases the central T/sub exc/ by /spl sim/13%. The axially peaked temperature profiles are consistent with an electron density of /spl sim/10/sup 13/ cm/sup -3/.

Subfields: Atomic and Molecular Physics, and Optics, Electrical and Electronic Engineering, Radiology, Nuclear Medicine and Imaging

View Paper: https://www.semanticscholar.org/paper/e396fc192d25eeefb125dd882a868459b38a585b