Influence of steam addition and elevated ambient conditions on NOx reduction in a staged premixed swirling NH3/H2 flame

By D. Pugh, P. Bowen, A. Valera‐Medina, Anthony Giles, J. Runyon, R. Marsh. Proceedings of the Combustion Institute, 2019

222 citations recorded by the source corpus.

Abstract There is growing interest in the application of renewably-generated NH 3 to support future energy requirements, however combustor designs and strategies require considerable development to reduce NO x emissions in particular. A turbulent swirl burner was used to experimentally and numerically appraise potential pathways for operational NO x reduction with a premixed NH 3 /H 2 /air flame. Reactants were supplied at elevated temperature with parametric changes made to pressure and humidity. Favourable agreement was demonstrated between exhaust gas measurements and chemical kinetic simulations with a reactor network model, showing NO x emissions to be sensitive to operational equivalence ratio, increasing by several orders of magnitude across the experimental range. The lowest NO x concentrations were achieved at the richest conditions, accompanied by high unburned fuel fractions in the product stream. An increase in combustor pressure remarkably reduced exhaust NO x concentrations primarily due to enhanced NH 2 formation, and subsequent NO consumption in the post-flame zone. Reactant humidification was explored in detail for the first time with this fuel, and shown to reduce NO x production limiting thermal pathways with the extended Zel'dovich mechanism. NO consumption in the post-flame zone was also enhanced through an increase in OH-produced NH 2 , and together with pressure, resulted in elevated exhaust NH 3 concentrations. Whilst this effect was comparatively small, it meant that leaner humidified operation could be employed to reduce unburned fuel fractions without a NO x penalty. Emissions performance was further improved by the application of staged combustion, with secondary airflow used to improve fuel burnout. Humidity and pressure were optimised in the staged configuration to achieve operation with sampled respective NO x and NH 3 exhaust fractions of 32 and 50 ppmvd (15%O 2 ), at a globally lean equivalence ratio. There is considerable scope for further system optimisation through improved mixing of secondary air and increased ambient pressure.

Subfields: Computational Mechanics, Fluid Flow and Transfer Processes, Materials Chemistry

View Paper: https://www.semanticscholar.org/paper/dfdb90b9bee3bd14c550fcd35eb55ca8e97ce6c0

Citations in the corpus