Two-Phase Flow Patterns, Pressure Drop, and Heat Transfer during Boiling in Minichannel Flow Passages of Compact Evaporators
By Satish G. Kandlikar. 2002
140 citations recorded by the source corpus.
Subfields: Computational Mechanics, Mechanical Engineering
View Paper: https://www.semanticscholar.org/paper/dd907358f3f96f9269c614791c7abb9ad8e2ece5
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Computational Mechanics
- Suresh V. Garimella
- Satish G. Kandlikar
- Yoav Peles
- Ali Kosar
- A. Bergles
- J. Lienhard V
- P. Griffith
- G. Kendall
In Mechanical Engineering
- Satish G. Kandlikar
- Suresh V. Garimella
- Yoav Peles
- A. Bergles
- Ali Kosar
- T. Harirchian
- J. Lienhard V
- P. Griffith
Citations in the corpus
- Boiling and Evaporation in Small Diameter Channels (2003, methodology): “The Kandlikar equation worked well for qualities below 40%, but the authors found that they could get within±20% using a modified form of the Liu and Winterton equation.”
- History, Advances, and Challenges in Liquid Flow and Flow Boiling Heat Transfer in Microchannels: A Critical Review (2012, background): “[7] Kandlikar, S.”
- Fundamental issues related to flow boiling in minichannels and microchannels (2002, background): “Recently, an exhaustive review of available literature on minichannels has been published by Kandlikar [29].”
- Measurements and High-Speed Visualizations of Flow Boiling of a Dielectric Fluid in a Silicon Microchannel Heat Sink † (2006, background): “However, since flow in microchannels is usually laminar, conventional boiling correlations were found to over-predict the boiling heat transfer (Liu and Garimella, 2005); correlations based on nucleate boiling, on the other hand, gave better predictions for flow boiling in microchannels (Kew and Cor”
- Nucleation characteristics and stability considerations during flow boiling in microchannels (2006, background): “Mukherjee and Kandlikar [18] studied the problem numerically and confirm that introducing the pressure drop elements and operating the inlet manifold at a higher pressure leads to a reduction in the backflow intensity.”
- Boiling heat transfer in a hydrofoil-based micro pin fin heat sink (2007, background): “This is not surprising, and the linkage between flow patterns and heat transfer mechanisms is well documented in numerous archival publications [ 12 ,14,18, 19,21,22,106].”