Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures

By J. Lemaître, R. Desmorat. 2005

1,051 citations recorded by the source corpus.

View Paper: https://www.semanticscholar.org/paper/da2cb7255a0b44b0a804e2c6bf19f67cd1cb7aff

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

Citations in the corpus

Energy Dissipation and Release During Coal Failure Under Conventional Triaxial Compression (2015, background): “A damage variable x was introduced to take into considerations the deviation of the stress–strain curve from the straight line (Lemaitre and Desmorat 2005):”
A level set based model for damage growth: The thick level set approach (2011, unknown): “Other types of models involving closure effects may be found in [46] ( ,d)= (1−d)〈〉+ : 〈〉++ (1−hd)〈〉− : 〈〉−+ 2 (1−d)〈T r 〉(2)++ 2 (1−hd)〈T r 〉(2)− (88) where and are the Lamé elastic coefficients and h 1.”
Mullins effect and cyclic stress softening of filled elastomers by internal sliding and friction thermodynamics model (2009, background): “Note that actual damage (i.e. nucleation and growth of voids and microcracks) is expected to grow very slowly during the very first cycles and to gradually increase as the number of cycles increases up to rupture (Lemaitre and Desmorat, 2005).”
A critical review of experimental aspects in ratcheting fatigue: microstructure to specimen to component (2019, unknown): “Progression of damage by means of nucleation and growth of defects, such as micro-voids during tensile deformation and micro-cracks during fatigue, and their coalescence into macrocracks, eventually results failure of metals in different loading conditions [84,85].”
Formulation of the high-fidelity generalized method of cells with arbitrary cell geometry for refined micromechanics and damage in composites (2010, background): “…landmark publications have made continuum damage mechanics a classical subject and an independent area in mechanics, e.g., Kachanov (1986), Mura (1987), Lemaitre and Chaboche (1990), Krajcinovic (1996), Lemaitre (1996), Voyiadjis and Kattan (2005) and Lemaitre and Desmorat (2005) among many others.”
Quantifying near‐field and off‐fault deformation patterns of the 1992 Mw 7.3 Landers earthquake (2015, background): “…of deformation [e.g., Li et al., 1998; Vermilye and Scholz, 1998; Chester and Chester, 1998; Yamashita, 2000; Ben-Zion et al., 2003; Mamada et al., 2004; Chester et al., 2005; Lemaitre and Desmorat, 2005; McGuire and Ben-Zion, 2005; Cochran et al., 2009; Frost et al., 2009; Shelef and Oskin, 2010].”
A multiaxial creep-damage model for creep crack growth considering cavity growth and microcrack interaction (2014, methodology): “Following the pioneering work of Kachanov [1] and Rabotnov [2], dozens of creep-damage models have been presented according to the multifarious definitions of damage, with a single [3–10], double [11–13], triple [14–16] or even quadruple [17] damage variables.”