Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane.
By Hong Liu, B. Logan. Environmental Science and Technology, 2004
1,597 citations recorded by the source corpus.
Subfields: Electrical and Electronic Engineering, Environmental Engineering
View Paper: https://www.semanticscholar.org/paper/d845a186b8209244631d32f3c65d89fcce46f7f9
How researchers see this paper
The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.
In Electrical and Electronic Engineering
- B. Logan
- J. Regan
- R. Rozendal
- Korneel Rabaey
- Sang-Eun Oh
- H. Hamelers
- Cees J. N. Buisman
- Shaoan Cheng
In Environmental Engineering
- B. Logan
- J. Regan
- R. Rozendal
- Korneel Rabaey
- H. Hamelers
- Cees J. N. Buisman
- Sang-Eun Oh
- Shaoan Cheng
Citations in the corpus
- An overview of cathode material and catalysts suitable for generating hydrogen in microbial electrolysis cell (2013, positive): “30 V [10,11].”
- Hydrogen and electricity production from a food processing wastewater using fermentation and microbial fuel cell technologies. (2005, background): “This single chamber design has been shown to produce greater power densities than that achieved with the two-chamber system (Oh et al., 2004; Liu and Logan, 2004).”
- Electricity generation using membrane and salt bridge microbial fuel cells. (2005, background): “In both cases the cathode potentials (190mV for the salt bridge and 163mV for the membrane system) were substantially smaller than the theoretical value of 605mV, assuming standard condi- tions and a partial pressure of oxygen of 0.2 atm (Liu and Logan, 2004).”