Elements of Metallurgy and Engineering Alloys

By F. C. Campbell. 2008

751 citations recorded by the source corpus.

Subfields: Aerospace Engineering, Mechanical Engineering, Mechanics of Materials

View Paper: https://www.semanticscholar.org/paper/d8133fb8e17ed2a5809e03cc43c7914ea49f2b0d

How researchers see this paper

The researchers whose trusted networks rank it highest, strongest advocate first. Every researcher gets a different order.

In Aerospace Engineering

In Mechanical Engineering

In Mechanics of Materials

Citations in the corpus

Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718 (2019, background): “′ is known as a strengthening precipitate in other Ni-base superalloys, it plays a minor role in IN718 strengthening due to low coherency strains it creates within the γ fcc matrix (less than ~1.25%) [30]. Instead, γ″ serves as the main strengthening precipitate since it produces up to 2.9% coherenc”
A general perspective of Fe–Mn–Al–C steels (2017, result): “el) and prompt a homogeneous microstructure. However, the chemical macro-segregation (distances from 1 cm to 100 cm) and the microporosities in the alloy cannot be eliminated by simple solubilization [261, 262]. In addition, solution treatments have the drawback that as the solution temperature incr”
AlSi12 in-situ alloy formation and residual stress reduction using anchorless selective laser melting (2015, background): “Use of eutectic compositions minimise energy usage and alloy segregation during the casting process [16].”
Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound (2018, background): “As the lowcycle fatigue mechanism is different from that of the high-cycle fatigue [44], three data points below 90 MPa, i.”
Highly optimized embedded-atom-method potentials for fourteen fcc metals (2011, methodology): “In addition to vacancies, we also considered numerous interstitial point defects during potential fitting: tetrahedral interstitials, octahedral interstitials, and dumbbell interstitial defects along the [100], [110], [111] directions.”
Nonlinear ultrasonic wave modulation for online fatigue crack detection (2014, background): “It is estimated that up to 90 percent of failures of in-service metallic structure are the result of fatigue cracks [1].”
Ultrasonic waves for materials evaluation in fatigue, thermal and corrosion damage: A review (2019, neutral): “Figure 1 [5] – Crack propagation stages More than 90% of metal structural failure during service is caused by fatigue failure [6].”
A review: drilling performance and hole quality of aluminium alloys for aerospace applications (2020, background): “The 7000 series are normally used in the upper wing skins, where strength is the primary design factor [6].”